Vs Vertical Sump Slurry Pump

• Warranty: 1 Year
• Power Source: Electric
• Structure: Single-Stage Pump
• Material: Cr27, Cr30, and Rubber Liner Material
• Pressure: High Pressure
• Outlet Size: 1.5-12 Inches
• Model NO.: VS
• Power: 15-200kw
• Usage: Chemical
• Application: Commercial Buildings, Industrial Utilities
• Transport Package: Wooden Case or as Your Require
• Trademark: BODA
• Origin: Shijiazhuang
• Production Capacity: 200pieces/Year

Product Description

Description:

VS pumps are vertical, centrifugal slurry pumps submerged in sump to work.They are designed for delivering abrasive,large particle and high density slurries.These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.Wet parts of type VS pump are made of abrasion-resistant metal. All parts of type VSR pump immersed in liquid are lined with rubber outer liner.They are suited to transport non-edge angle abrasive slurry.

Typical Applications---

Sump drainage washdown
Floor drainage
Mill sumps
Carbon transfer
Monitoring
Magnetite mixing

Advantages:

The sump pump body is bolted to the support plate. The bearing Assembly is designed on the top of the support plate. The physical layout of the submersible sump pump simplifies maintenance operations

Vertical cantilever design eliminates the need of shaft seal or sealing water, the centrifugal sump pump can function property even when there is insufficient slurry getting to the suction side.

The open impeller design has vanes on both sides to balance the centrifugal forces to ensure stable operation. Wide flow passage allows large particle and high viscosity slurries to get through.

The double screen filters are set at the suction side to stop big particles out of the slurry. Protect pump life time.

Installation Types:

DC: The motor mounting base is set above the bearing assembly, connect with couplings. It is easyu to install and repair.

BD: A V-belt is used to connect the motor shaft to pump shaft. The motor frame is above the bearing assembly. In this way, it is easy to replace the grooved wheels. The purpose of swapping grooved wheels is to change the rotary speed of the pump to meet different pump working conditions or conform to the worn-down sump pump.