| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
BZA series are with radial split casing,among which BZA are OH1 types of API60 pumps, BZAE and BZAF are OH2 types of API610 pumps. High generalization degree, no difference of hydraulic parts and bearing parts; series of pump can be installed insulation jacket structure; high pump efficiency; Bigger corrosion allowance for casing and impeller; Shaft with shaft sleeve, totally isolated to the liquid, avoid corrosion of shaft, improves lifespan of the pumpset; Motor is with extended diaphragm coupling, easy and smart maintenance, without taking apart pipes and motor.
Sizes over 80mm, casings are double volute type to balance radial thrust to improve noise and extend life span of the bearing.
Suction flange is horizontal, discharge flange is vertical, flange can bear more pipe load. According to client's requirements, flange standard can be GB, HG, DIN, ANSI, suction flange and discharge flange have the same pressure class.
Vanes extend to suction of impeller, at the same time size of casing enlarged, thus make the pumps have better cavitation performance. For special purpose, induction wheel can be equipped to improve the anti-cavitation performance.
Bearing support is a wholly one, bearings are lubricated with oil bath, oil slinger can ensure enough lubrication, all these prevent somewhere temperature rise because of lower lubricating oil. According to specific work condition, bearing suspension can be non-cooling(with steel heat), water cooling (with water cooling jacket) and air cooling(with fan). Bearings are sealed by labyrinth dustproof disc.
Shaft seal can be packing seal and mechanical seal.
Seal of pump and auxiliary flush plan will be in accordance with API682 to ensure safe and reliable seal in different work condition.
Used for pumping clean or slightly polluted, cold or hot, chemically neutral or aggressive liquids.Especially used in:
Petrochemical process industry, chemical industry and coal industry
Paper and pulp industry and sugar industry
Water-supply industry and seawater desalination industry
Heating and air conditioning syetem
Powerstation
Environment-protect engineering and low temperature engineering
Ship and offshore industry,etc
Size DN 25~400mm
Capacity: Q up to 2600m3/h
Head: H up to 250m
Operation Pressure: P up to 2.5Mpa
Operation Temperature: T -80ºC~+450ºC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
){kind=link}