| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DY stainless steel horizontal multistage oil pump
Flow range: Q-3.75~840m3/h
Head range: H=19~1400m
Transport temperature: -20-105ºC Viscosity less than 120 cstoke oil and petroleum
Inlet pressure: less than 0.6MPa
Sealing form: packing seal, mechanical seal
Pump material: HT200, HT250, QT600, ZG, 304, 316, 316L, 317L, 904L, CD4-MCu, etc
DY type stainless steel horizontal multistage pump This series of pump is a horizontal single-suction multistage sectional centrifugal pump, using the hydraulic model of efficient and energy-saving products, with high efficiency, wide performance range, safe and stable operation, low noise, long life, easy installation and maintenance and other advantages.
It can be used for conveying clean water without solid particles (abrasives) and suspended solids or other liquids with physical and chemical properties similar to clean water. Our company has passed the IS09001:2016 quality system certification, product design, production and service with strict and standardized control system, product quality is fully guaranteed.
DY type: DY type pumps are used to transport oil and petroleum products that do not contain solid particles, have a temperature of -20ºC ~ 105ºC and a viscosity of less than 120 cstok.
In addition, the company can realize the multi-outlet structure and function of this series of pumps according to the needs of users.
Structural characteristics
This type of pump is a single shell, single suction, multi-stage Chen section type centrifugal pump structure, pump inlet level, outlet vertical upward specific structure is as follows:
1. Stator part
Mainly by the front section, the middle section, the guide vane, the rear section, the bearing frame and the balance chamber cover and other parts are connected with the rod and nut, and the front section and the rear section are fixed on the pump seat with bolts and nuts
2, rotor components
The impeller, impeller stop sleeve, balance stop sleeve, balance disc and shaft sleeve parts are mainly tightened with small round nuts, and fixed on the shaft with flat keys to prevent rotation. The whole rotor is supported on bearings at both ends. The rotor is directly connected to the motor by an elastic pin coupling.
To compensate for expansion, a toothed pad is installed between the final stage and the balance sleeve, which should be replaced when the pump is serviced.
3. Balance mechanism
The hydraulic balancing device of balance plate which can completely and automatically balance the axial force is adopted. The device is composed of four parts: balance plate, balance plate, balance sleeve and balance stop sleeve.
Type description
Example: DY46-50X4
DY - multi-stage centrifugal oil pump
46 - Design point flow is 46m3/h
50 - Design point single-stage lift is 50m
4 - The level is 4
Example: 100DY16X3
100 - Pump inlet diameter is 100mm
DY - multi-stage centrifugal oil pump
16 - Pump design point single-stage lift of 16m
3 - The level is 3
| English Name 1 | DY Stainless Steel Horizontal Multistage Oil Pump |
| English Name 2 | Horizontal multistage oil pump |
| Using | Mining |
| Material | HT200,HT250,QT600,ZG,304,316,316L,317L,904L,CD4-MCu |
| Advantage | Widely used in urban water supply and drainage, power station, industrial process system water intake, pressure, farmland drainage and irrigation and various water conservancy projects, petrochemical projects |
DY type stainless steel horizontal multistage pump This series of pump is a horizontal single-suction multistage sectional centrifugal pump, using the hydraulic model of efficient and energy-saving products, with high efficiency, wide performance range, safe and stable operation, low noise, long life, easy installation and maintenance and other advantages.
It can be used for conveying clean water without solid particles (abrasives) and suspended solids or other liquids with physical and chemical properties similar to clean water. Our company has passed the IS09001:2016 quality system certification, product design, production and service with strict and standardized control system, product quality is fully guaranteed.
DY type: DY type pumps are used to transport oil and petroleum products that do not contain solid particles, have a temperature of -20ºC ~ 105ºC and a viscosity of less than 120 cstok.
In addition, the company can realize the multi-outlet structure and function of this series of pumps according to the needs of users.
Structural characteristics
This type of pump is a single shell, single suction, multi-stage Chen section type centrifugal pump structure, pump inlet level, outlet vertical upward specific structure is as follows:
we are Shijiazhuang Boda Industrial Pump Co.,Ltd from china .
We mainly operate slurry pumps, pump driven equipment, pump parts & resistance-wearing castings.
We can do OEM for buyers .
We can produce products according to buyers' drawings .
We can keep products quality ,material ,shipping and offer good service on after sales .
We can do many materials for rubber and metallic Spare Parts .
){kind=link}