| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Years |
| Max.Head: | 50-80m |
| Max.Capacity: | >400 L/min |
| Driving Type: | Motor |
| Impeller Number: | Single-Stage Pump |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier IJ type corrosion resistant chemical centrifugal pump
Flow range: 6 ~ 1200m3/h
Head range: 5 ~ 80m
Conveying temperature: -80ºC ~ +450ºC
Inlet pressure: 16~250m
Sealing form: packing seal, mechanical seal
Pump material: HT200, HT250, QT600, ZG, 304, 316, 316L, 317L, 904L, CD4-MCu, etc
Type IJ single-stage single-suction cantilever chemical centrifugal pump is based on IH series pumps, referring to foreign technology and combined with the actual use of users and optimized design of new products, its rated performance and installation size in line with ISO2858 standards, equivalent to ISO2858-1975, manufacturing technical conditions in line with ISO5199 standards. It is mainly suitable for the transportation of slurry with solid content less than 50% in the chemical process and the medium containing crystalline impurities, which is the same type as the IH type promoted by the state.
Performance range (design point) :
Flow: 6 ~ 1200m3/h;
Head: 5 ~ 80m;
Speed: 1450 ~ 2900;
Direction of rotation:
From the drive end, rotate in a clockwise direction, steering opposite to the F-series.
Main use
Alkali industry: mother liquor of ammonia brine produced by soda ash and hydrazine, normal temperature caustic soda produced by chlor-alkali, chlorine products and chlorate, hypochlorite.
Non-ferrous metallurgy: electrolytic copper shackle electrolyte, production of drill acid mist liquid, production of zinc slurry, production of hunger hunger acid, production of gold acid and sulfur service liquid, etc.
Iron and steel industry: electroplating, pickling, waste acid treatment.
Acid industry: nitric acid, sulfuric acid, hydrochloric acid, phosphoric acid, acetic acid, etc.
Petrochemical: petroleum refining acetaldehyde, alkyl benzene manufacturing.
Synthetic fibers and plastics industry: polyester, polyvinyl chloride production, textile, printing and dyeing industry.
Paper industry: Transport of pulping liquor and bleaching liquor.
Fertilizer industry: Production of urea, nitrate plating.
Pharmaceutical industry: production of pharmaceuticals and pesticides.
Environmental protection: Transportation of acid mist.
Compared with IH pump, IJ chemical pump structure has the following characteristics;
1. The cantilever of the impeller is shortened and the diameter of the shaft is thickened;
2, asymmetric section volute, pump shell without mouth ring;
3. Adopt three imported bearings;
4, equipped with foreign advanced double-end mechanical seal or packing seal similar to the new type of seal.
Due to the above structure, the pump has the following advantages:
1, can transport high viscosity or solid media, then the efficiency of the pump is higher than the IH pump;
2, the asymmetric section volute reduces the impact loss of fluid and shortens the size of the pump casing;
3, increase the strength of the shaft, reduce the deflection of the rotor, so the operation is stable, long sealing life;
4. The impeller nut is integrated with the impeller, which improves the inlet condition of the pump and improves the anti-cavitation performance of the pump;
5, advanced shaft seal form, so that the sealing effect is better, reduce the leakage of the pump;
6. The clearance of the pump can be adjusted without removing the pump shell and impeller, which reduces the maintenance time and saves the maintenance cost.
Structural features:
The pump body is axial suction and radial discharge. The outlet and platinum are in a vertical plane, the support foot is cast on the pump body, which is directly fixed on the base, and the pump cover is fixed on the suspension body through the upper mouth. The pump body and suspension body clamp the pump cover. The connecting nut between the suspension body and the pump body is removed during maintenance, and the rotating part of the pump can be withdrawn from the pump body without disassembling the inlet and outlet lines. This is a common chemical pump structure in the world. For large size pumps, an intermediate extension section is added between the pump header and the motor shaft. So in the overhaul. Remove the center extension. The rotor part can exit the pump body, and the motor does not have to move.
| English Name 1 | IJ Type Corrosion Resistant Chemical Centrifugal Pump |
| English Name 2 | Horizontal chemical pump |
| Using | Mining |
| Material | HT200,HT250,QT600,ZG,304,316,316L,317L,904L,CD4-MCu |
| Advantage | Widely used in urban water supply and drainage, power station, industrial process system water intake, pressure, farmland drainage and irrigation and various water conservancy projects, petrochemical projects |
Structural features:
Standard chemical process pump body: horizontal rear door structure, the pump head and the motor are connected by a coupling, installed on the bottom plate, the impeller is open back, three bearings, the shaft seal is external mechanical seal, with a cooling device, and the oil level of the bearing body is observed by an oil mirror; Compact and reasonable structure. The pump is cast on the pump body with supporting feet, the use of foot support structure, can withstand the load from the pipeline and directly to the foundation, so that the pump rotor will not be bent due to the load of the pump, thus ensuring the bearing and mechanical seal have the best service life. It is not necessary to open the pipeline connected with the pump body during maintenance, as long as the bolt of the bracket and the pump body is opened, and the two can be separated to maintain the impeller and mechanical seal, which is simple and convenient.
Impeller: closed, half start, fully open impeller, cz chemical centrifugal pump axial force is mainly balanced by the back blade or balance hole, the residual axial force is borne by the bearing.
Pump cover: The sealing chamber is formed with the sealing gland, and the standard chamber size can be equipped with various sealing types.
Shaft seal: According to different working conditions, can be used packing seal, single end machine seal, double single-side machine seal, series machine seal and other forms
Bearing: The lubrication method is thin oil lubrication, and the oil level is controlled by the constant oil cup to fully ensure that the bearing works in a good lubrication state.
Shaft: With shaft sleeve protection, to prevent the medium directly contact with the shaft corrosion, improve the service life of the shaft.
Trailing design: can not move the pump inlet and outlet pipeline, can be repaired, easy to use.
we are Shijiazhuang Boda Industrial Pump Co.,Ltd from china .
We mainly operate slurry pumps, pump driven equipment, pump parts & resistance-wearing castings.
We can do OEM for buyers .
We can produce products according to buyers' drawings .
We can keep products quality ,material ,shipping and offer good service on after sales .
We can do many materials for rubber and metallic Spare Parts .
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}