ZQ(R) series of slurry pumps are hydraulic devices composed of coaxial motors and pumps that are submerged in the fluid to work. These pumps are characterized by unique structure wide passage, high capacity of removing sewage, and high quality materials, offering excellent corrosion resistance. They are suitable for transferring the liquid containing solid particles, like sand, coal slag, and tailings, and removing slurries in metallurgical plants, mines, steel mills, or power plants, as an ideal alternative to traditional pumps for taking away slurries.
These pumps are developed by the company by absorbing internationally advanced technologies, and using wear-resistant materials, which greatly improve the service life and reduce the maintenance workload. The pump includes a set of agitating impellers at the bottom, aside from the main impeller, which create turbulence for precipitated slurries, and thus enable transport of high-density fluids without the help of any auxiliary device. The pump also involves a unique sealing device, which can effectively balance the pressure inside and outside the oil chamber, thus keeping balance between the pressure at both ends of the mechanical sealing, ensuring the reliability of the mechanical sealing as much as possible, and consequently greatly extending its service life. On request, the pump comes with many protective measures, such as overheating protection and water detecting, allowing for normal operation over long periods in harsh working conditions. Meanwhile, other protective measures, such as anti-condensation creams for motors and bearing temperature measurement devices are available on request to enable normal operation in special situations.
ZQR hot water submersible slurry pump can remove the fluid shall less than 100 º C. According to customers requirements, which can add thermal overload protection and water detection device, which can be working safely in harsh environment for long time.
ZQ(R) series of submersible slurry pumps have been very popular among customers since launching into domestic markets.
Two. Features:
Compared with common slurry pumps, this series of products have many advantages as follows:
1. No limitation on delivery heads, high efficiency, and thoroughness in removing sewage.
2. No auxiliary vacuum pumps is required, bringing down the cost of ownership.
3. No auxiliary agitating device is required, thus enabling easier operation.
4. No complex ground protection or fixation device is needed for fastening the motor in water, thus allowing for easier installation and maintenance.
5. As the agitating impeller is in direct contact with the surface of sediments, the fluid density can be controlled by the submerged depth, thus enabling easier control of density.
6. The device is submerged in water to work, thus producing no noise or vibration, and making the work site cleaner.
Three. Operation Requirements:
Provided with a three-phase AC power supply of 50HZ/60HZ, 380V/460V/660V.
For ZQ models, the fluid shall not be high than 40 º C in temperature, for ZQR, the fluid shall not be high than 100 º C in temperature, containing no flammable and explosive gases.
The content of solid particles in the fluid by weight shall not be higher than 30%, and the density of the fluid shall not be larger than 1.2kg/l.
The maximum submerged depth shall not be more than 20 meters, and the minimum one shall not be less than the height of the motor.
The pump shall run at normal conditions in the fluid, in the continuous operation mode.
When the one-site conditions fail to meet the above requirements, please highlight them in the order. Customization is available.
Features:
1. The motor is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor.
2. In addition to the main impeller, there is also a stirring impeller, which can stir the sludge deposited on the bottom of the water into a turbulent flow and then extract it.
3. The main flow parts such as impeller and stirring impeller are made of high wear-resistant materials, which are wear-resistant, corrosion-resistant, non-clogging, and have strong sewage discharge capacity, and can effectively pass larger solid particles.
4. It is not limited by the suction range, the slurry suction efficiency is high, and the silt dredging is more thorough.
5. There is no need to equip auxiliary vacuum pump, so the investment is lower.
6. There is no need to be equipped with auxiliary stirring or spraying devices, making the operation easier.
7. The motor is submerged under water, no complicated ground protection and fixing devices need to be built, and the management is easier.
8. The stirring impeller directly contacts the deposition surface, and the concentration is controlled by the depth of the dive, so the concentration control is more free.
9.The equipment directly dives into the water to work, there is no noise and vibration, and the site is more tidy.
FAQ
1. What Products does BODA pump mainly produce?
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample.
2. Is BODA direct factory or trader?
BODA own foundry workshop, Machining Workshop, and Assembly workshop.
Welcome to visit our factory anytime.
3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump
4. What information is required for quotes?
If you need the spare parts, we need to know the parts Code and material.
If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better.
Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}