| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Rubber Cam Rotor Pump
Wear-resistant rotor pumps, also often called wear-resistant mud pumps, wear-resistant slurry pumps, the material and form design of the special wear-resistant rotors of BODA rotor pumps provide a perfect transportation solution for working conditions that require wear resistance. Not only that, the wear-resistant lining XARA500 configured in the BODA heavy industry and mining industry is also an indispensable basic configuration in wear-resistant applications.
product description
Wear-resistant rotor pumps, also often called wear-resistant mud pumps, wear-resistant slurry pumps, the material and form design of the special wear-resistant rotors of BODA rotor pumps provide a perfect transportation solution for working conditions that require wear resistance. Not only that, the wear-resistant lining XARA500 configured in the BODA heavy industry and mining industry is also an indispensable basic configuration in wear-resistant applications.
Application scope
Sludge from sewage treatment plants (concentrated sludge, sandy sludge, etc.)
Tunnel mud, titanium dioxide abrasive media, construction mud, ore slurry;, sand and gravel slurry
Coal water slurry, gray water slurry, high concentration slime, cement slurry
Especially wear-resistant, the pump cavity is wide, the inlet and outlet are not blocked, and the medium transportation distance in the pump is short;
Wide rotor design, special wear-resistant rotor material, NBR rubber, which is the same material as aircraft tires, extending the life of the rotor
BODA cam pumps are fully lined on all four sides for abrasive media. The tie wall under this design is not in direct contact with the media, and any state of wear can be repaired by replacing the liner.
The design of the flow chamber with soft and hard combination ensures the wear resistance of the pump.
At the same time, the BODA cam system is designed with an intermediate isolation cavity. The intermediate cavity is filled with lubricating oil, which can not only lubricate the mechanical seal and the connection device between the rotor and the shaft, but also monitor whether the mechanical seal is in good condition ( When the mechanical seal is damaged, oil will escape from the spiral hole under pressure).
Stainless steel cam double rotor pump
Flow rate: Flow rate up to 400m³/H
Pressure: pressure up to 1.6Mpa
Self-priming: suction vacuum degree reaches -0.095Mpa
Efficiency: up to 90%
Viscosity: up to 1.5 million cp
Solid content: 60% solid content slurry
Adjustable: After configuring the frequency converter, the flow rate can be adjusted at will and can be measured.
>
Reversible: symmetrical structure, reversible conveying direction
Idling: Rotor/rotor/casing micro clearance fit, no friction, can run dry
Maintenance: Simple disassembly and assembly, easy maintenance and cleaning, few wearing parts
Efficient: high energy saving, low failure rate, reliable sealing, low noise
Optional: If insulation and cooling are required, jacketed pump with very good thermal conductivity .
product description
BODA stainless steel cam double rotor pump is specially designed for exploring fluid media with high viscosity, high solid content and strong corrosiveness. It is mainly used in fine chemical industry, daily chemical industry, pulp and paper industry, food Industrial, coating industry and other fields.
Typical conveying media for fine chemicals:
Resins, adhesives, polyurethanes, dyes, pigments, various intermediates, various slurries, chemical auxiliaries, printing and dyeing auxiliaries, leather auxiliaries, silicone oil, leather shoe polish, suspension, white latex, etc.
Typical conveying media in the food industry:
Chocolate, concentrated milk, yogurt, honey, syrup, sucrose, ketchup, concentrated juice, jam, ice cream, milk, yeast slurry, meat slurry, jelly, condiments, soy protein, etc.
Typical conveying media for daily chemicals:
AES, LAS, AOS, K12, SLES, sulfonic acid, glycerin, fatty alcohol, shower shampoo, skin cream, shampoo, detergent, toothpaste, pure soap, hand soap, laundry detergent slurry, etc
Structure and composition
Rotor: The cam rotor processed by a high-precision imported machining center has extremely small errors. The unique cam rotor perfectly seals and isolates the inlet and outlet of the pump. The vacuum degree of the pump is as high as -0.095MPA. The rotor material and type can be selected according to the characteristics of the transported materials. .
System chamber: The pump chamber is sealed by a system chamber that can be opened quickly, enabling quick maintenance of the pump. The pump body is processed by an imported machining center. The pump body is processed in strict accordance with American 3A standards and meets the requirements of CIP and SIP. Gear: High-precision and high-standard synchronous gears have good urban fit, smooth transmission, low noise, and excellent load-bearing capacity.
Shaft: The transmission shaft is processed by an imported machining center and has the characteristics of high precision, high bending strength, and strong wear resistance.
Mechanical seal: According to the different characteristics of boring, the mechanical seal form and material are specifically adopted to ensure zero leakage, no pollution, and more environmental protection
Gear box: The gear box is processed by an imported machining center with high precision, high concentricity and high versatility.
Bearings: Leaving a separate arrangement of bearings increases the concentricity of pump operation, increases the bearing capacity of the shaft and makes the pump run more smoothly, thereby increasing the service life of the shaft and mechanical seal.
| English Name 1 | Food-Grade Cam-Type Wear-Resistant Rotor Pump |
| English Name 2 | Food-Grade Cam-Type Wear-Resistant Rotor Pump Spare Parts |
| Using | Mining |
| Material | Stainless Steel 316/316L 2205 Rubber |
| Advantage | Acid and alkali resistance |
Structure and composition
Rotor: The cam rotor processed by a high-precision imported machining center has extremely small errors. The unique cam rotor perfectly seals and isolates the inlet and outlet of the pump. The vacuum degree of the pump is as high as -0.095MPA. The rotor material and type can be selected according to the characteristics of the transported materials. .
System chamber: The pump chamber is sealed by a system chamber that can be opened quickly, enabling quick maintenance of the pump. The pump body is processed by an imported machining center. The pump body is processed in strict accordance with American 3A standards and meets the requirements of CIP and SIP. Gear: High-precision and high-standard synchronous gears have good urban fit, smooth transmission, low noise, and excellent load-bearing capacity.
Shaft: The transmission shaft is processed by an imported machining center and has the characteristics of high precision, high bending strength, and strong wear resistance.
Mechanical seal: According to the different characteristics of boring, the mechanical seal form and material are specifically adopted to ensure zero leakage, no pollution, and more environmental protection
Gear box: The gear box is processed by an imported machining center with high precision, high concentricity and high versatility.
Bearings: Leaving a separate arrangement of bearings increases the concentricity of pump operation, increases the bearing capacity of the shaft and makes the pump run more smoothly, thereby increasing the service life of the shaft and mechanical seal.
we are Shijiazhuang Boda Industrial Pump Co.,Ltd from china .
We mainly operate slurry pumps, pump driven equipment, pump parts & resistance-wearing castings.
We can do OEM for buyers .
We can produce products according to buyers' drawings .
We can keep products quality ,material ,shipping and offer good service on after sales .
We can do many materials for rubber and metallic Spare Parts .
){kind=link}