High Head Self-Balancing Multistage Pump D (P) Type

• Customization: Available
• After-sales Service: 1 Years
• Warranty: 1 Years
• Model NO.: BODA-Multistage Pump
• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Diesel Engine or Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Open or Closed
• Usage: Pumps
• Material: High Chrome Alloy B05 B07 B21 B25 Rubber: Br55
• OEM: Yes
• Interchangeable: Yes
• Factory: Yes
• Size Range: 1.5/1′′-20/18′′
• Application: Mineral Processing&Tailings
• Delivery Time: Within 10 Days After We See Your Deposit
• Orgin: Hebei China
• Type: Closed Impeller/Open Impeller
• Loading Port: Xingang
• Product Name: Type D(P) Self-Balancing Multistage Pump
• Transport Package: Wooden Case
• Specification: Many material
• Trademark: Boda
• Origin: Shijiazhuang
• HS Code: 8413910000
• Production Capacity: 1000PCS/Month

Product Description

English Name 1	Type D(P) Self-Balancing Multistage Pump
English Name 2	Multistage Pump
Using	Mining
Material	HT200,HT250,QT600,ZG,304,316,316L,317L,904L,CD4-MCu
Advantage	A variety of materials to suit different working conditions

D(P) type self-balancing multistage pump is our company in the introduction, digestion, absorption of advanced technology on the basis of research and development, the product is not only high efficiency, good cavitation performance, the key is stable and reliable operation. Suitable for coal, mines, factories and other occasions to transport solid particle content is not more than 1.5% (particle size is less than 0.5mm), temperature is not more than 40ºC neutral mine water and other similar sewage.
Example: D280J-43X8(P);

D(P) - High efficiency and energy saving self-balancing multistage pump;

280 - design point flow (m3/h);

J - Mechanical seal (not marked as packing seal);

43 - Design point pump single-stage lift (m);

8 - The pump has 8 stages.

The structure and working principle of the main components
1. Main parts
Front inlet section, outlet section, rear inlet section, guide vane, right guide vane, outlet section left guide vane, outlet section right guide vane, middle section, impeller, right impeller, shaft, balance drum, front positioning sleeve, rear positioning sleeve, connecting frame, reversing flow path, etc.; The rotor is composed of an impeller, a right impeller, a balance drum, an impeller sleeve, a front positioning sleeve, a rear positioning sleeve and other parts installed on the shaft. The rotor driving end is supported by a roller bearing, and the end is arranged face-to-face by a diagonal contact ball bearing. The bearings are lubricated by grease.

2. Studio
It is formed by the front inlet section, the back inlet section, the middle section, the guide vane, the right guide vane, the left guide vane of the outlet section, the right guide vane of the outlet section, the reversing flow passage and the outlet section together, and the liquid enters along the axial side. The axial force acting on each pair of symmetrical impeller can cancel each other when working, so that the axial force generated can be balanced, and the low pressure stage is arranged at both ends to reduce the pressure on the shaft seal.

3, sealing parts
Shaft seal: using soft packing seal, the tightness of the packing must be appropriate, and the liquid can ooze drop by drop.

Transmission: the pump is directly driven by the motor through the elastic coupling; From the motor direction, the pump rotates in a clockwise direction.

Bearing: roller bearing is used at the drive end, and a diagonal contact ball bearing is used at the end.

Sealing ring: prevent high pressure water in the pump from leaking back to the water inlet part, and can be replaced after wear.

Balance drum: installed in the final impeller, rotate with the rotor, the balance drum outer circular surface and the balance sleeve hole surface to form a radial gap.

Front and back positioning sleeve: in the two packing chambers, it can be replaced after wear.