| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Years |
| Max.Head: | 50-80m |
| Max.Capacity: | >400 L/min |
| Driving Type: | Motor |
| Impeller Number: | Single-Stage Pump |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Conveying medium: neutral or corrosive liquid or a small number of particles
Applicable industries: Chemical industry, environmental protection, wastewater, water, treatment, sea desalination
Product features: large flow, low head, high efficiency
Structure form: national standard, horizontal, pump and motor coupling connection
Caliber: ~ 800mm
Flow rate: ~ 7000 m3/h
Head: ~ 18m
Speed: 980/1450r/min
Operating temperature: -20 ~ +120ºC
Pressure rating: 1.6Mpa
I. Product introduction:
THW type chemical mixed flow pump is on the basis of FJX type forced circulation pump and has been upgraded for many times, and has won many awards in the industry. The pump has the characteristics of large flow, high efficiency, low head, low speed and convenient maintenance, etc. When inspecting or disassembling the impeller and shaft seal, it is not necessary to disassemble the pipeline connected with the pump body. The pump shaft is equipped with a protective sleeve, the bearings are lubricated with thin oil, and the berths in the bearing box can be controlled by the "constant position" oil cup. The pump body is cast with legs, which can withstand any load from the pipeline and pass directly to the foundation. Therefore, the pump shaft will not bend due to the load borne by the pump, thus ensuring the bearing has a **** service life. The pump is also equipped with a complete exhaust device for suction line exhaust. The API682 recommended sealing arrangement and flushing solution is available.
Product advantages:
1.THZW chemical mixed flow pump is designed and developed according to GB/T13008 standard, and the technical indicators reach the level of similar products at home and abroad;
2. The pump body, impeller and pump cover are designed with CFD computer fluid dynamics hydraulic components for module design and precision casting. It has the characteristics of wide flow path, high efficiency, good cavitation residual performance, small radial force, accurate size, smooth flow path and good interchangeability.
3. The main materials of the pump body, impeller, back cover, shaft sealing box, shaft sleeve, shaft protection sleeve, throttle ring, impeller cover and other flow parts are 1Ci13Ni9Ti, 316, 316L, ZG20#, C4 steel, CD4MCu, Monel alloy, Hastelloy C-276, 904L, titanium alloy, heat resistant and wear-resistant steel and other materials for different working conditions.
4. The shaft seal is double-end mechanical seal, combined mechanical seal and packing seal, and the sealing surface of the grinding can be selected: silicon carbide, carbide and other materials to meet the requirements of various working conditions; Combined mechanical seal: friction material with high performance wear-resistant material, long service life, easy maintenance by combined seal; Packing seal: there are two kinds of single packing box and double packing box, taking into account the evaporator situation, the company specially designed for the user in the evaporator material is not removed in the case of replacement packing, whether mechanical seal or packing seal can be set with the impeller.
5. It is easy to change the direction of the pump inlet and outlet: the user only needs to reverse install the impeller, and change the direction of the pump and the pump inlet and outlet.
6. High reliability: the shaft cantilever end is equipped with a diversion gas chamber to reduce shaft deflection.
7. Water-cooled bearing housing: there are water-cooled jacket at both ends of the bearing, lubricated with thin oil, long service life.
8. The impeller has excellent anti-cavitation performance, and can operate normally under **** pressure 0.05MPa.
9. International standard axle pull back design, no need to disassemble the pipe, easy maintenance;
Product use:
Widely used in petroleum, chemical industry, alkali making, smelting, rare earth, pesticides, dyes, medicine, paper making, electroplating, electrolysis, radio, foil formation, scientific research institutions, national defense industry and other production processes to transport corrosive liquids, especially suitable for strong alkali, organic capacitant and precious liquid transport.
Performance range:
Caliber: ~ 800mm, flow: ~ 7000 m3/h, head: ~ 18m, speed: 980/1450r/min, working temperature: -20 ~ +120ºC, pressure grade: 1.6Mpa
| English Name 1 | Chemical Mixed Flow Pump |
| English Name 2 | Mixed Flow Pump Spare Parts |
| Using | Mining |
| Material | 1Ci13Ni9Ti, 316, 316L, ZG20#, C4 steel, CD4MCu, Mo |
| Advantage | Transport corrosive liquids, especially suitable for the transport of strong alkali, organic capacitors and valuable liquids |
Product use:
Widely used in petroleum, chemical industry, alkali making, smelting, rare earth, pesticides, dyes, medicine, paper making, electroplating, electrolysis, radio, foil formation, scientific research institutions, national defense industry and other production processes to transport corrosive liquids, especially suitable for strong alkali, organic capacitant and precious liquid transport.
Performance range:
Caliber: ~ 800mm, flow: ~ 7000 m3/h, head: ~ 18m, speed: 980/1450r/min, working temperature: -20 ~ +120ºC, pressure grade: 1.6Mpa
we are Shijiazhuang Boda Industrial Pump Co.,Ltd from china .
We mainly operate slurry pumps, pump driven equipment, pump parts & resistance-wearing castings.
We can do OEM for buyers .
We can produce products according to buyers' drawings .
We can keep products quality ,material ,shipping and offer good service on after sales .
We can do many materials for rubber and metallic Spare Parts .
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}