Model: BL, BM BH, BHH
Capacity: 10.8~5400m3 /h
Head: 3~118m
Motor power: 15~1200KW
Introduction: BL BM, BH and BHH series pumps contain cantilever and horizontal centrifugal pumps, which apply to transport slurry with strong corrosion proof and high concentration for many industries such as metallurgy, mine, coal, electric power, building materials and so on. The kind of pump can be used in series for multi stages. Its pump body consist of replaceable antifriction metal lining or rubber lining, and its impeller is made of antifriction metal or rubber. The pump body lining and impeller of BHH serial pump are made of antifriction metal only. The shaft seal of BL .BM, BH and BHH serials pumps may adopt packing seal or centrifugal seal. Pump outlet can be spaced by 45. According to requirement, and it may be installed by rotating eight different angles.
Structure Drawing:
Selection Chart:
Type
BM BH |
Allowable Mating Max.Power (kw) |
Clear Water Performance |
Impeller |
| Capacity Q |
Head H
(m) |
Speed n
(r/min) |
Max EFF η(%) |
NPSH)
(m) |
No of Vanes |
Impel Dia(mm) |
| (m 3 /h) |
(L/S) |
| 1.5/1B-BH |
15 |
12.6-28.8 |
3.5-8 |
6-68 |
1200-3800 |
40 |
2-4 |
5 |
152 |
| 2/1.5B-BH |
15 |
32.4-72 |
9-20 |
6-58 |
1200-3200 |
45 |
3.5-8 |
5 |
184 |
| 3/2C-BH |
30 |
39.6-86.4 |
11-24 |
12-64 |
1300-2700 |
55 |
4-6 |
5 |
214 |
| 4/3C-BH |
30 |
86.4-198 |
24-55 |
9-52 |
1000-2200 |
71 |
4-6 |
5 |
245 |
| 4/3D-BH |
60 |
| 6/4D-BH |
60 |
162-360 |
45-100 |
12-56 |
800-1550 |
65 |
5-8 |
5 |
365 |
| 6/4E-BH |
120 |
| 6/4D-BH |
60 |
180-396 |
50-110 |
7-61 |
600-1600 |
55 |
3-8 |
4 |
372 |
| 6/4E-BH |
120 |
| 8/6E-BH |
120 |
360-828 |
100-230 |
10-61 |
500-1140 |
72 |
2-9 |
5 |
510 |
| 8/6R-BH |
300 |
| 8/6E-BH |
120 |
360-828 |
100-230 |
7-52 |
400-1000 |
70 |
2.5-6 |
4 |
536 |
| 8/6R-BH |
300 |
360-828 |
100-230 |
7-52 |
400-1000 |
70 |
2.5-6 |
4 |
536 |
| 10/8ST-BH |
560 |
612-1368 |
170-380 |
11-61 |
400-850 |
71 |
4-10 |
5 |
686 |
| 12/10ST-BH |
560 |
936-1980 |
260-550 |
7-68 |
300-800 |
82 |
6 |
5 |
762 |
| 14/12ST-BH |
560 |
1260-2772 |
350-770 |
13-63 |
300-600 |
77 |
3-10 |
5 |
965 |
| 16/14ST-BH |
560 |
1368-3060 |
380-850 |
11-63 |
250-550 |
79 |
4-10 |
5 |
1067 |
| 16/14TU-BH |
1200 |
| 10/8E-BM |
120 |
540-1440 |
150-400 |
14-60 |
600-1100 |
73 |
4-10 |
5 |
549
|
| 10/8R-BM |
300
|
| Type BL |
Allowable Mating Max. Power
(Kw) |
Clear Water Performance |
Impeller |
Capacity/
Q m ³ /hr |
Head/m |
Speed
/rpm |
Max Efficiency
/% |
NPSH
/m |
Nos of Vane s |
Impeller Diameter
/mm |
| 20A-BL |
7.5 |
2.34-10.8 |
6--37 |
1400--3000 |
30 |
|
4 |
152.4 |
| 50B-BL |
15 |
16.2--76 |
9--44 |
1400--2800 |
55 |
3.5--8 |
5 |
190 |
| 75C-BL |
30 |
18-151 |
4--45 |
900--2400 |
57 |
3--6 |
4 |
229 |
| 100D-BL |
60 |
50-252 |
7-46 |
800--1800 |
60 |
2--3.5 |
4 |
305 |
| 150E-BL |
120 |
115--486 |
12-51.5 |
800--1500 |
65 |
2--6 |
4 |
381 |
| 200E-BL |
120 |
234--910 |
9.5--40 |
600--1100 |
64 |
3-6 |
4 |
457 |
| 250E-BL |
120 |
396--1425 |
8--30 |
500--800 |
77 |
2--10 |
5 |
550 |
| 300S-BL |
560 |
468--2538 |
8--60 |
400--950 |
79 |
2-10 |
5 |
653 |
| 350S-BL |
560 |
650--2800 |
10--59 |
400--840 |
81 |
3--10 |
5 |
736 |
| 400ST-BL |
560 |
720--3312 |
7--51 |
300--700 |
80 |
2--10 |
5 |
825 |
| 450 ST-BL |
560 |
1008--4356 |
9--48 |
300--600 |
80 |
2--9 |
5 |
933 |
| 550 TU-BL |
1200 |
1980-7920 |
10-50 |
250-475 |
86 |
4-10 |
5 |
1213
|
Horizontal Centrifugal Slurry Pump
1. Durable slurry pump used for mines and industry solids pumping.
2. Wearing parts are made of Anti-abrasive ultral Cr alloy or rubber.
3. Slurry pump drive module design which makes the spare parts can be changed easily
4. Designed and built for long time with low maintenance for the Heavy brand slurry pump
5. Equipped the electric motor or diesel engine with slurry pump according to your requirement
6. Long service life for the wet parts of slurry pump.
The Features:
1. The wet parts for slurry pump are made of wear-resistant chromium alloy.
2. Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices for the slurry pump.
6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.
FAQ
1. What Products does BODA pump mainly produce?
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample.
2. Is BODA direct factory or trader?
BODA own foundry workshop, Machining Workshop, and Assembly workshop.
Welcome to visit our factory anytime.
3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump
4. What information is required for quotes?
If you need the spare parts, we need to know the parts Code and material.
If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better.
Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}