| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Years |
| Max.Head: | 50-80m |
| Max.Capacity: | >400 L/min |
| Driving Type: | Motor |
| Impeller Number: | Single-Stage Pump |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier ZMD self-priming fluoroplastic magnetic pump
Product Introduction Model Meaning ZMD80-65-160FZMD Company Code Magnetic Drive Z self-imbibition pump F Fluorine plastic material 80 inlet diameter 80mm65 Outlet diameter 65mm160 impeller nominal diameter 160mm Name: None
Conveying medium: sulfuric acid, aqua regia, bromide, benzene, phenol, fat, chlorine and other strong acidic corrosive liquids
Applicable industries: Chemical, pharmaceutical, acid, flammable, explosive, volatile, high-risk industries
Product features: no leakage, acid resistance
Self-priming height: 4M
Structure: horizontal, pump and motor directly connected
Caliber: 25 ~ 100mm
Flow rate: 1.5 ~ 100m3/h
Head: 10 ~ 80m
Speed: 2900r/min
Operating temperature: -20 ~ +160ºC
Pressure rating: 1.6Mpa
Power: 1.1 ~ 30KW
Material: Fluorine lined, PTFE, PFA
Product Introduction:
Product Overview:
Non-leakage fluorine lined magnetic self-priming pump (referred to as: Fluorine lined magnetic self-priming pump is the application of modern magnetometry principle, the use of permanent magnet magnetic drive to achieve non-contact transmission of torque, the use of external mixing axial return water structure design, that is, when the motor drives the outer rotor (that is, the outer magnetic steel) assembly to rotate, through the action of the magnetic field line through the isolation sleeve to drive the inner rotor (that is, the inner magnetic steel) assembly and the impeller to rotate synchronously. Because the medium is enclosed in a static isolation sleeve, so as to achieve the purpose of pumping the medium without leakage, the pump body is composed of a liquid suction chamber, a liquid storage chamber, a volute, a return hole, a gas-liquid separation chamber, etc. After the pump starts, under the action of centrifugal force, the remaining liquid in the suction chamber and the air in the liquid inlet pipe are stirred into a gas-water mixture by the impeller, and the mixture enters the gas-liquid separation chamber through the volute. As the flow rate slows down, the gas-water separation is caused, and the air is discharged from the pump outlet, and the liquid returns to the pump through the water return hole. After several cycles, the air in the liquid inlet pipe is discharged. The pump formed a certain degree of vacuum, to achieve the role of self-priming, to solve the shaft seal leakage of the mechanical transmission pump, and the design of a fully sealed, no leakage, no pollution, strong self-priming, strong acid resistance, high efficiency and energy saving new industrial pump. Performance to meet international standards, can replace expensive stainless steel, special alloy materials, imported chemical pumps.
| English Name 1 | ZMD self-priming fluoroplastic magnetic pump |
| English Name 2 | Chemicals Pump |
| Using | Mining |
| Material | Fluoroplastic material |
| Advantage | Conveying sulfuric acid, aqua regia, bromide, benzene, phenol, lipids, chlorine and other strong acidic corrosive liquids |
Design features:
1. Non-leakage fluorine lined magnetic self-priming pump is a combination of non-leakage magnetic pump and self-priming centrifugal pump performance, independent research and design of fully sealed, no leakage, no pollution, strong self-priming, strong acid resistance of a new industrial pump;
2. The pump body, inner rotor, pump cover, impeller, isolation sleeve and other flow parts are made of polytetrafluoroethylene and polyperfluorinated ethylene propylene resin produced by Shanghai Sanaifu New Materials Co., Ltd. or DuPont Group Co., LTD.
The pump body and the pump cover are made of fluorine plastic material to be molded and sintered, and the size and flow channel are smooth and clean to ensure the corrosion resistance and pressure resistance of the pump;
The impeller is also molded by fluorine plastic sintering to ensure reliable torque transmission, its closed structure, flow channel optimization design, high efficiency, low NPSHR value to ensure the stability of pump flow and head;
The isolation sleeve is made of fluorine plastic material for molding and sintering molding and low vortex sleeve design, with a high rupture pressure, high safety factor and eliminate all excess heat and reduce energy consumption, while the pump chamber is completely isolated from the outside world, so that the pump chamber is completely sealed, and no leakage is achieved during the transmission process. At the same time, the components are modular design, good interchangeability!
3. Fluorine plastic (PTFE, FEP, PFA) is the world's most corrosion-resistant material (commonly known as: plastic king), can transport any strong (strong) degree of acid, alkali, oxidizer and other corrosive media without damage;
4. Magnet selection of ferrite magnets, NdFeb and samarium cobalt, with good magnetism, high temperature resistance, no demagnetization; Its magnetic energy product is 28 trillion gau otes, the temperature limit is 350ºC, under the conditions of conventional cooling, limit its higher use temperature of 260ºC, can not avoid demagnetization, making the theoretical service life of the magnetic material up to 20 years;
5. The sliding bearing is made of high-wear-resistant silicon carbide, graphite, tetrafluoroides and other materials, and the lubrication groove is set up to effectively ensure the service life of the pump;
6. Gas-liquid mixed self-priming design, with strong self-priming function, self-priming height up to 4m;
7. No leakage, all sealing points are sealed by a closed static seal, driven by a magnetic coupling, does not require nitrogen sealing, safe, economic and efficient, to solve the medium leakage;
8. No need for independent lubrication and cooling water, reducing energy consumption;
9. Direct pull back design, no need to disassemble the pipe, easy maintenance;
10. Horizontal installation, low vibration, low noise, stable operation;
Product use:
Widely used in petroleum, chemical industry, acid, alkali, smelting, rare earth, pesticides, dyes, medicine, paper making, electroplating, electrolysis, pickling, radio, foil formation, scientific research institutions, national defense industry and other production processes to transport corrosive liquids, especially suitable for flammable, explosive, volatile, toxic, strong acid and base, organic capacitive agent and precious liquid transport.
Performance range:
Design pressure: 1.6Mpa, flow :2-100m3/h, head: 15-80m, power: 1.1-55kw.
Applicable temperature:
-20 ~ 120ºC, the use of new materials can withstand up to 180ºC;
Optional accessories:
Temperature monitoring device, air defense operation device, leakage monitoring device;
Note:
When the proportion of the medium is greater than 1.3mg/cm3, the order should be explained that empty operation is prohibited, and the transport of media containing particles or crystals is prohibited.
we are Shijiazhuang Boda Industrial Pump Co.,Ltd from china .
We mainly operate slurry pumps, pump driven equipment, pump parts & resistance-wearing castings.
We can do OEM for buyers .
We can produce products according to buyers' drawings .
We can keep products quality ,material ,shipping and offer good service on after sales .
We can do many materials for rubber and metallic Spare Parts .
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}