| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
BDC type anti-dry wear lined fluorine magnetic pump
Brand manufacturer: Shijiazhuang Boda
Product alias: Magnetic pump
Main material: F46, PFA
Flow range: 3-400m3/h
Lift range: <80M
Power range: <90kw
BDC magnetic pump and the market is more common CQF, CQB-F and other types of fluorine lined magnetic pump compared, has a big difference and significant advantages, LHC magnetic pump series with heavy load structural design, all specifications can be customized according to user requirements, can transport high gravity, high viscosity, high temperature, extreme low temperature and other special conditions. With full sealing, no leakage, high efficiency, energy saving, environmental protection, low noise, low vibration and many other advantages, can be widely used in medicine, pesticides, petroleum, chemical industry, alkali, paper, dyes, electronics, sewage treatment and many other fields, is to transport all kinds of acid, alkali, salt, organic solvents, flammable, explosive, corrosive and valuable fluids good choice.
| English Name 1 | BDC type anti-dry wear lined fluorine magnetic pump |
| English Name 2 | Fully sealed non-leakage magnetic pump |
| Using | Can be widely used in medicine, pesticides, petroleum, chemical, alkali, paper, dye, electronics, sewage treatment and many other fields |
| Material | F46,PFA |
| Advantage | Can be widely used in medicine, pesticides, petroleum, chemical, alkali, paper, dyes, electronics, sewage treatment and many other fields, is to transport all kinds of acid, alkali, salt, organic solvents, flammable, explosive, corrosive and valuable fluids good choice . |
First, high efficiency design
BDC magnetic pump [pump body] and [impeller] apply international advanced hydraulic model design, adopt special lining technology such as "dovetail groove, shell mesh", the lining plastic is molded by high temperature, the [isolation sleeve] adopts double layer design, the inner sleeve adopts F46 molding and sintering molding, and the [strengthening sleeve] adopts reinforced carbon fiber winding molding, which can withstand pressure up to 3MPA. Because the strengthening sleeve does not have any metal components, the phenomenon of "magnetic eddy current" is effectively solved, and the efficiency of the entire magnetic pump is increased by about 10%. It has the advantages of low power and low electricity cost, and truly saves energy and environmental protection.
Second, high-performance material configuration
[internal and external magnetic tile] uses 38SH NdFeb with outstanding performance in rare earth permanent magnet. When the working temperature exceeds 120 degrees and is less than 150 degrees, 38UH Ndfeb can be selected. Internal and external magnetic arrangement, the use of combined push-pull magnetic circuit design, greatly improve the magnetic transmission efficiency, effectively eliminate the magnetic pump "slip" phenomenon, can transport high viscosity, high gravity of the material.
[Spindle, sleeve] is made of high temperature and dry wear resistant KKSSIC non-pressure sintered silicon carbide, which can ensure the normal operation of the pump in the case of small flow and short time shortage of liquid, and can transport any concentration of acid and base.
[Reinforcing sleeve] using imported carbon fiber winding molding, effectively eliminate the phenomenon of "magnetic eddy current", and withstand pressure up to 3MPa.
Three, fixed axis design
Using the principle of magnetic levitation, the use of internal and external magnetic field balance characteristics, so that the entire inner rotor and impeller in the pump chamber is always in the "magnetic levitation" state, the main shaft through the front and rear end fixed, therefore, the main shaft only bear the guiding support role, no need to transfer torque through the main shaft, to ensure the service life of the main shaft, to eliminate the traditional fluorine lined magnetic pump shaft breaking phenomenon. The inner hole of the impeller and rotor is equipped with silicon carbide shaft sleeve, and the two-way spiral flow guide groove is designed to fully ensure the lubrication performance of the impeller and the inner rotor at high speed.
Four, open design
The traditional magnetic pump is equipped with an intermediate bearing seat, which makes the pump cavity and the isolation sleeve relatively independent. The process design of the return hole is adopted, and the circulating loop is used to provide lubrication for the sliding bearing. When a load of material crystallized or a foreign body blocked the return hole, the lubrication function will fail, resulting in serious faults. The lubricity of shaft sleeve and shaft is fully guaranteed.
Five, impeller rotor integrated design
[impeller and inner rotor] adopts the connected design, the internal magnetic directly drives the impeller to rotate, without the main shaft transmitting torque, without the impeller locking nut, to ensure that the pump in the reverse and transport of high gravity materials, the shaft will not fall off, and can transport materials containing a small number of particles, corrosion and wear resistance, stable operation.
we are Shijiazhuang Boda Industrial Pump Co.,Ltd from china .
We mainly operate slurry pumps, pump driven equipment, pump parts & resistance-wearing castings.
We can do OEM for buyers .
We can produce products according to buyers' drawings .
We can keep products quality ,material ,shipping and offer good service on after sales .
We can do many materials for rubber and metallic Spare Parts .
){kind=link}