The cyclone group can meet the ore demand of large mines, our company can customize the cyclone group for users, according to different feed particle size, underflow concentration and production capacity of the cyclone selection and determine the number of cyclone, its classification efficiency is 20-30% higher than the spiral classifier, can reach 70-85%.
Scope of application: pulp classification
Processing capacity: ≤2500m3/h
Product working principle
A cyclone is a device that uses fluid pressure to produce rotational motion. When the slurry enters the cyclone at a certain speed, it is forced to rotate when it encounters the wall of the cyclone. Due to the different centrifugal forces, the solid coarse particles in the slurry are subjected to large centrifugal forces, which can overcome the hydraulic resistance to move towards the wall, and under the combined action of their own gravity, the spiral downward movement along the wall, while the fine and small particles and most of the water are not close to the wall because of the small centrifugal force, and then rotate with the slurry. Driven by the subsequent feed, the slurry continues to move downward and rotate, so the coarse particles continue to concentrate to the periphery, while the fine particles stay in the central area, and the particle size becomes larger and larger from the center to the wall, forming a layered arrangement. As the slurry flows from the cylinder part of the cyclone to the cone part, the flow section becomes smaller and smaller. Under the shrinkage and pressure of the outer slurry, the inner slurry containing a large number of fine particles has to change its surface direction and move upward to form an internal swirl, which is discharged from the overflow pipe and becomes an overflow, while the coarse particles continue to spiral down the wall of the cyclone, forming an external swirl, and finally discharged from the bottom flow port. Become a sand sink.
The cyclone group is combined with other equipment to form a classifier group, which can increase the processing capacity of the mill by more than 15%, and the multifunctional screen of one of the combined equipment can automatically return the coarse particles from the overflow to the mill.
Product advantage
The interior is lined with wear-resistant rubber, including the box, pipeline and key parts are covered with adhesive treatment, the life of the cyclone can reach more than 2 years. The cyclone group runs smoothly and has high classification efficiency.
Product features
The cyclone group can be equipped with a classification automatic control system, which sets parameters for the characteristics of black and non-ferrous metals and chemical minerals, non-metallic minerals and building materials, respectively, to detect and automatically adjust the liquid level of the pump and the flow rate, outlet pressure, pulp concentration and motor speed of the slurry pump, so as to ensure the stability of the cyclone inlet index. According to the feedback data of cyclone overflow concentration and flow rate, the parameters are adjusted to keep the index in the best range.