Application and Features:
Type BHH series slurry pumps are cantilevered, horizontal, centrifugal slurry pumps.They are designed for the handling highly abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc.The pumps of this type also may be installed in multistage series.
The frame plate liner and impeller for BHH pump are adoptable of wear-resistant metal only.
The shaft seals for type BHH pumps may be adoptable of gland seal or expeller seal.The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Brief Introduction to Pump Type Selection:
Refering to the performance curves of the pumpm the selected capacity range should be as follows:
Pump type BHH: 40%-80% for medium density, medium abrasive slurries
40%-100% for lower density, lower abrasive slurries
Structure Drawing:
Selection Chart:
| Pump Model |
Allowable Max. Power(kw) |
Clear Water Performance |
|
| capacity Q |
Head H(m) |
speed n(r/min) |
Max.eff. η% |
NPSH (m) |
Impeller Dia(mm) |
| m3/h |
l/s |
| 1.5/1C-BHH |
30 |
16.2-34.2 |
4.5-9.5 |
25-92 |
1400-2200 |
20 |
2-5.5 |
330 |
| 3/2D-BHH |
60 |
68.4-137 |
19-38 |
25-87 |
850-1400 |
47 |
3-7.5 |
457 |
| 4/3E-BHH |
120 |
126-252 |
35-70 |
12-97 |
600-1400 |
50 |
2-5 |
508 |
| 6/4F-BHH |
560 |
324-720 |
90-200 |
30-118 |
600-1000 |
64 |
3-8 |
711 |
| 8/6S-BHH |
560 |
468-1008 |
130-280 |
20-94 |
500-1000 |
65 |
4-12 |
711
|
Horizontal Centrifugal Slurry Pump
1. Durable slurry pump used for mines and industry solids pumping.
2. Wearing parts are made of Anti-abrasive ultral Cr alloy or rubber.
3. Slurry pump drive module design which makes the spare parts can be changed easily
4. Designed and built for long time with low maintenance for the Heavy brand slurry pump
5. Equipped the electric motor or diesel engine with slurry pump according to your requirement
6. Long service life for the wet parts of slurry pump.
The Features:
1. The wet parts for slurry pump are made of wear-resistant chromium alloy.
2. Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices for the slurry pump.
6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.
FAQ
1. What Products does BODA pump mainly produce?
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample.
2. Is BODA direct factory or trader?
BODA own foundry workshop, Machining Workshop, and Assembly workshop.
Welcome to visit our factory anytime.
3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump
4. What information is required for quotes?
If you need the spare parts, we need to know the parts Code and material.
If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better.
Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa
){kind=link}