| After-sales Service: | Yes |
|---|---|
| Warranty: | 1 Year Warranty ( Except Wetted Parts) |
| Max.Head: | 50-80m |
| Max.Capacity: | >400 L/min |
| Driving Type: | Motor |
| Impeller Number: | Single-Stage Pump |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Features:
Wear - resistant rubber as liners prolongs the service life by 2-4 times.Internal rubber
liners with small specific gravity can effectively improve the impeller speed. Maximum flow
rate than other slurry pump can improve the efficiency of the whole 10-20%, overall
efficiency increased more than 30%.Small specific gravity wet parts, convenient
maintenance, low noise; reduce the number of repair personnel and the operational
maintenance cost. Smooth wet parts make operation more stable.
Application:
Boda wear-resistant slurry pump is suitable for processing the high abrasion slurry or the
material containing solid particles.
Metal smelting plant: convey slurry
Sand plant: transporting and conveying sand and gravel, feeding sand and water all types of classification and dewatering plants
Coal preparation plant: classifying, screening and conveying heavy medium, conveying
coal pulp
Ceramics and glass factory: porcelain clay and sandstone transportation, feeding
hydrocyclone and effluent disposal etc.
Steel works: conveying slurry, rust and corrosive liquid etc.
Irrigation systems and dredging: silt removal in dams and river bed, sand classifying
Note: please specify if applied where oil and chemicals are contained
MAIN PERFORMANCE PARAMETER OF BODA PUMP BPASlurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Slurry Pump Spare Parts
Slurry pump wet end parts mainly include Impeller, volute liner, Casing, shaft, throat bush, wear plate, case, cover, stuffing box, lantern restrictor, cover plate bolt, throat bush, shaft sleeve, cover plate liner, frame plate liner...
1.centrifugal slurry pumps and spare parts can fully interchange with world famous brand.
2.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer elastomer elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.
4.Wear -resistant Metal Liner and Rubber Liner available
5.Seal Type: gland seal , impeller seal and mechanical seal
6.Can be installed in multistage series
7.easy to maintenance
The properties of the rubber material:
We have variety of natural rubber and elastomers, which can be used for pumping corrosive or acid slurries. But the rubber material is not suitable for slurries which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.
Horizontal Centrifugal Slurry Pump
1. Durable slurry pump used for mines and industry solids pumping.
2. Wearing parts are made of Anti-abrasive ultral Cr alloy or rubber.
3. Slurry pump drive module design which makes the spare parts can be changed easily
4. Designed and built for long time with low maintenance for the Heavy brand slurry pump
5. Equipped the electric motor or diesel engine with slurry pump according to your requirement
6. Long service life for the wet parts of slurry pump.
The Features:
1. The wet parts for slurry pump are made of wear-resistant chromium alloy.
2. Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices for the slurry pump.
6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}