Vertical Submerged Pump Spare Parts for Slurry Pump

• Customization: Available
• After-sales Service: 1 Years
• Warranty: 1 Years
• Model NO.: 100VS-SP
• Max.Head: as You Requested
• Max.Capacity: as You Requested
• Driving Type: as You Requested
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Suction Centrifugal
• Impeller: Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Material: High-Chromium Alloy B05 B07 Ni-Hard etc.
• Discharge Diameter: 40-300mm
• The Length of The Immersed in Liquid: 0.9m-4m
• Theory: Centrifugal Pump
• Structure: Single-Stage Pump
• Power: Electric
• Standard or Nonstandard: Standard
• Fuel: According to User Choice
• Application: Sewage / Sump / Mining Dewatering
• OEM: Yes
• Transport Package: Wooden Case or as Required
• Specification: As you requested
• Trademark: boda
• Origin: Shijiazhuang, Hebei
• HS Code: 8413910000
• Production Capacity: 100sets/Month

Product Description

English Name 1	Slurry Pump
English Name 2	Slurry pump parts
Using	Mining
Material	high chromium alloy
Advantage	Acid and alkali resistance, wear-resistant

Introduction of Centrifugal Slurry Pump  :
1. Abrasion and corrosion resisting 
2. Material: hard alloy metal(Cr27,Cr28, Cr30, CD4MCu) or rubber liner optional, 
3. Shaft seal: packing seal, expeller seal, and mechanical seal.
4. Power driver: electrical motor or diesel engine. 
Application of Centrifugal Slurry Pump :
Deliver slurry with hard particle, in the mining, metallurgy, coal washing, power plant, sewage water treatment, dredging, and chemical and petroleum industries 
1. Conveying mortar,slag which are strong corrosive and with solid particles.
2. Widely used in extracting sand, marine reclamation land,power plant,mining.
Features of Centrifugal Slurry Pump :

1. Multi-purpose sand and gravel pump, high efficiency and energy saving.
   2. Horizontal, centrifugal, one stage, single casing slurry pump.
   3. Distinctive innovation in hydraulic and structural design.
   4. Pump discharge direction can be changed in any 45 degree,easy installation.
   5. Long-term bearing life: The bearing assembly is composed of large diameter shaft
   and short overhang.

Component of Centrifugal Slurry Pump:
1. All of the metal wet parts can are made of high chromium alloy which has superior wear and erosion resistance or grey iron which has a high rigidity.
2. As the expeller ring is assembled together with the expeller, much pressure can be reduced effectively for the impeller. Meanwhile, it can still maintain a reliable sealing performance.
3. The parts such as labyrinth, labyrinth lock nut, end cover and shaft sleeve are used for bearing assembly; these parts can be changed easily and have high accuracy and longer service life.
4. Some fastening parts such as studs and bolts can be used for fixing the other parts securely. All the fastening parts can be attached easily, ensuring the safety.

1. All of the rubber parts have superior erosion resisting performance which can be used for a long life.

Drive type of Centrifugal Slurry Pump: 
DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor. 

CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump. 

ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space. 

CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.


 

1. BRV-SP vertical submerged chemical pump adopts double bearing supporting to improve the reliability and stability of operation.
2. A suction pump below 2m length can be added to pump inlet according to the requirement of working liquid level.Various materials are available for different applications.
3. BRV-SP vertical submerged chemical pump is suitable for conveying fluids weithout solids or fluids with a few suspending particles.It is widely used in industries of electric power,mining,cement,metallurgy,non-ferrous etc.

BPV-SP Vertical mud solid sludge handling submerged slurry pump

Dlivery within 2-4 weeks

 

Our factory can offer pumps according to your requested Head of Delivery and Flow Rate.
For select a proper slurry pump,could you please tell us some information?
 

Long Shaft Drainage Vertical Slurry Pump/Mine Dewatering Pump

SP series centrifugal slurry pumps are cantilevered, vertical, centrifugal slurry pumps. 

The SP/SPR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer.
Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available.

Features of Corrosive Liquid Transport Submersible Vertical Slurry Pump
1.SP (R) type submerged pumps are vertical centrifugal slurry pump, generally into the pool or pit to
work,used to transport abrasive, coarse particle, high concentration slurry.
2. Don't need any shaft seal and shaft seal water, in the inhaled volume insufficient conditions they
can also work normally.
3.SP (R) type submerged pumps' pump body is made of wear-resisting metal. Impeller is made of
wear-resistant metal or rubber, polyurethane SP (R) type submerged pumps parts into the liquid with
rubber lining,they are all applicable to transport corrosive slurry.