| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Compared with the conventional axial flow pump, the splint type axial flow pump has been greatly improved in terms of corrosion resistance, wear resistance, high temperature resistance, no leakage, efficiency and so on!
Fluorine lined axial flow pump, is a mature product designed by experts and verified by the market for many years, is currently widely used in titanium dioxide industry waste acid concentration treatment, compared with other materials, excellent corrosion resistance!
The pump has the characteristics of high efficiency and good cavitation performance. In the condition that titanium alloy can not be durable for a long time, the splint type axial flow pump can be applied for several years.
Fluorine lined axial flow pump features
First, strong corrosion resistance
The high quality PFA material used in the flow part of the pump is very adaptable to corrosive liquids such as nitric acid, sulfuric acid, hydrochloric acid, phosphoric acid and strong oxidant, especially the more corrosive, especially to show its superior performance. Its corrosion resistance far exceeds that of high-nickel alloy, No. 20 alloy, and more than high-silicon cast iron, and enjoys the reputation of the king of corrosion resistance in the world.
Second, excellent wear resistance
The pump is baked and moulded by a special process. The thickness of the fluorine lining of the steel lined composite pump body is more than 10mm, and the thickness of the fluorine lining of the splint pump body is more than 25mm, and the special treatment is carried out on the inner wall of the fluorine to resist the abrasion of ferrous sulfate.
Third, excellent high temperature resistance
The pump has excellent thermal instability, self-lubricity and impact resistance. Therefore, the key parts of fluorine plastic such as impeller will not crack due to impact, making up for the fragile defects of ceramic pump and high-silicon cast iron pump, because of the excellent performance of the whole machine, smooth operation, in the harsh environment of -30ºC ~ 150ºC can be assured of long-term use. (The waste acid is concentrated to a high temperature of 130 ° C, while the melting point of the fluorine material is 360 ° C)
4. Easy to disassemble and easy to maintain
Because the impeller, pump cover and shaft sleeve are all made of fluorine material, the pump's own weight is greatly reduced, and the rotor part can be easily and conveniently removed from the pump body, so the disassembly, unloading and installation can be easily completed. Avoid the silicon iron pump need to be carefully repaired, afraid of breaking, put hands and feet and other ills.
In summary: the pump is suitable for titanium dioxide waste acid concentration.
Fluorine lined axial flow pump structure
This series of pump is cantilever structure, horizontal installation can also be used according to user requirements by pulley drive, adjust the flow and lift.
Mechanical seal of axial flow pump lined with fluorine
The mechanical seal adopts double-end seal, the static ring is Sie, the dynamic ring adopts imported Hastelloy material, and must be washed with cooling water. Or use external mounted single end mechanical seal.
Installation of splint type axial flow pump
First, before installation should check the basic size, position, surface state, elevation meets the design requirements.
Second, the foundation gong bolt hole after washing and pouring concrete at least 48 hours of solidification and re-check the pump level and perpendicularity.
Third, the pump and the motor must be installed on the same axis, and its deviation does not exceed 0.2mm.
Fourth, the pump connection pipe should be reasonably equipped with a support, should not make the pump bear the weight of the device.
| English Name 1 | Splint Type Axial Flow Pump |
| English Name 2 | Splint Type Axial Flow Pump Spare Parts |
| Using | Mining |
| Material | Stainless Steel 316/316L 2205 Rubber |
| Advantage | Acid and alkali resistance |
Splint type axial flow pump structure characteristics
1, the pump according to the required parameters of the axial flow pump, according to the best flow conditions design.
2, the pump adopts the back door pull out structure pump, disassembly and maintenance is convenient, maintenance can not disassemble the connecting pipe, can be removed the pump shaft.
3, the shaft seal adopts a new type of combined seal, which can be suitable for transporting highly corrosive liquids containing suspended particles.
4, the pump body flow channel is not easy to block, the cavitation allowance is large, the shaft and bearing design reliability is high, to ensure smooth operation, small vibration, low noise, long life.
5. The rotation direction of the pump is indicated with an arrow on the bearing bracket.
we are Shijiazhuang Boda Industrial Pump Co.,Ltd from china .
We mainly operate slurry pumps, pump driven equipment, pump parts & resistance-wearing castings.
We can do OEM for buyers .
We can produce products according to buyers' drawings .
We can keep products quality ,material ,shipping and offer good service on after sales .
We can do many materials for rubber and metallic Spare Parts .
){kind=link}