| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
AY type high temperature centrifugal pump
Flow range: Q=2.5 ~ 800m3/h
Lift range: H=30~330m
Conveying temperature: -45-420ºC
Inlet pressure: 0-7.5MPa
Sealing form: packing seal, mechanical seal
Pump material: HT200, HT250, QT600, ZG, 304, 316, 316L, 317L, 904L, CD4-MCu, etc
AY high temperature centrifugal oil pump series is improved and redesigned on the basis of the original Y type oil pump series. It is a product developed to meet the needs of modernization and adapt to the upgrading of equipment centered on energy saving as soon as possible, with the following characteristics:
1. The bearing body parts replace the original 35, 50 and 60 bearing bodies with 45, 55 and 70 bearing bodies respectively to improve reliability;
2. The hydraulic overflow part adopts a high-efficiency and energy-saving hydraulic model, which increases the efficiency of the original Y-type oil pump by 5-8 percentage points on average;
3, in order to maintain continuity, the structural type, installation size, performance parameter range to keep the same as Y type oil pump, easy to update old products.
4, the degree of universality of parts is high, and the standard parts are shared by several series of products.
5, material selection and refining, mainly II, III class materials, bearing body and other parts increased to cast steel, cast iron two, for cold areas, open air use, Marine to provide favorable conditions.
6, bearing air cooling, fan cooling, water cooling three, according to the different use of the pump temperature selection. Fan cooling is especially suitable for areas with water shortage or poor water quality.
Structure specification
It is divided into six kinds of structures, such as single-stage single-suction cantilever type, two-stage single-suction cantilever type, single-stage double-suction and two-stage double-suction two-support type, two-stage single-suction two-support type.
The shell is radial split, especially suitable for conveying high temperature and flammable, explosive or toxic liquids. The installation mode is horizontal center line support. The suction flange and discharge flange of the pump are cast on the pump body, and are vertically facing up. The bearing chamber (stuffing box) and the pump cover are cast into one, which can be loaded with packing seal and balanced type, rhyotype and series type mechanical seal. An optional water-cooled cavity jacket is cast on the outside of the shaft seal cavity. The water-cooled cavity must be equipped with special requirements or when the conveying medium is water at temperatures exceeding 66 ° C and hydrocarbons at temperatures exceeding 150 ° C.
The impeller is cast as a whole, and after static balance check, the axial force of the pump is mainly balanced by the impeller balance hole.
The bearing body is equipped with a set of radial ball bearings and a set of back-to-back thrust ball bearings. The bearings are lubricated by oil slinging ring, and the surface outside the bearing is cast with a heat sink, which can be cooled by air (T < 120 ° C), fan cooling (T =120-260 ° C) and water cooling (T =260-420 ° C).
It is easy to remove impeller, shaft, bearing, shaft seal and other parts without disassembling suction or discharge lines during pump maintenance. The shaft seal is mechanically sealed. The pump is driven directly by an electric motor through a flexible diaphragm extension coupling. From the motor direction, the pump rotates counterclockwise.
Main use
Petroleum, liquefied petroleum gas and other media free of solid particles can be transported in the refining, petrochemical and chemical industries and elsewhere.
Type description
Example: 50AYII60X2A;
50 - Pump inlet diameter is 50mm;
AY - modified centrifugal oil pump;
II - The flow parts are Class II materials;
60 - The design point of the pump single-stage head is 60m;
2 - The pump stage is 2 stages;
A - Impeller outside diameter cutting code.
| English Name 1 | DY Stainless Steel Horizontal Multistage Oil Pump |
| English Name 2 | Horizontal multistage oil pump |
| Using | Mining |
| Material | HT200,HT250,QT600,ZG,304,316,316L,317L,904L,CD4-MCu |
| Advantage | Widely used in urban water supply and drainage, power station, industrial process system water intake, pressure, farmland drainage and irrigation and various water conservancy projects, petrochemical projects |
DY type stainless steel horizontal multistage pump This series of pump is a horizontal single-suction multistage sectional centrifugal pump, using the hydraulic model of efficient and energy-saving products, with high efficiency, wide performance range, safe and stable operation, low noise, long life, easy installation and maintenance and other advantages.
It can be used for conveying clean water without solid particles (abrasives) and suspended solids or other liquids with physical and chemical properties similar to clean water. Our company has passed the IS09001:2016 quality system certification, product design, production and service with strict and standardized control system, product quality is fully guaranteed.
DY type: DY type pumps are used to transport oil and petroleum products that do not contain solid particles, have a temperature of -20ºC ~ 105ºC and a viscosity of less than 120 cstok.
In addition, the company can realize the multi-outlet structure and function of this series of pumps according to the needs of users.
Structural characteristics
This type of pump is a single shell, single suction, multi-stage Chen section type centrifugal pump structure, pump inlet level, outlet vertical upward specific structure is as follows:
we are Shijiazhuang Boda Industrial Pump Co.,Ltd from china .
We mainly operate slurry pumps, pump driven equipment, pump parts & resistance-wearing castings.
We can do OEM for buyers .
We can produce products according to buyers' drawings .
We can keep products quality ,material ,shipping and offer good service on after sales .
We can do many materials for rubber and metallic Spare Parts .
){kind=link}