| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | Yes |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Slurry pump throat bush is one of wet parts in horizontal slurry pump which directs slurries to impeller, it is suction side liner which is connected with cover plate.
Throat bush is common in bigger pumps, because throat bush and volute liner are normally in one solid piece in small pumps. The design of slurry pump throat bush is based on cost effective in manufacturing and operation.
Many users and sellers use the term 'throatbush' interchangeably with 'throat bush', it is a common and generally accepted alternate spelling.
Slurry pump throat bushes are normally made in high chrome alloy or natural rubber, special materials are also available.
| Code | Material name | Type | Description |
| BR26 |
Anti Thermal Breakdown Rubber
|
Natural Rubber | BR26 is a black, soft natural rubber. It has superior erosion resistance to all other materials in fine particle slurry applications. The antioxidants and antidegradents used in RU26 have been optimized to improve storage life and reduce degradation during use. The high erosion resistance of RU26 is provided by the combination of its high resilience, high tensile strength and low Shore hardness. |
| BR33 |
Natural Rubber (Soft)
|
Natural Rubber | BR33 is a premium grade black natural rubber of low hardness and is used for cyclone and pump liners and impellers where its superior physical properties give increased cut resistance to hard, sharp slurries. |
| BR55 |
Anti Thermal Natural Rubber
|
Natural Rubber | BR55 is a black, Anti-corrosive natural rubber. It has superior erosion resistance to all other materials in fine particle slurry applications. |
| BS01 | EPDM Rubber | Synthetic Elastomer | |
| BS12 | Nitrile Rubber | Synthetic Elastomer | Elastomer BS12 is a synthetic rubber which is generally used in applications involving fats, oils and waxes. BS12 has moderate erosion resistance. |
| BS31 |
Chlorosulfonated Polyethylene (Hypalon)
|
Synthetic Elastomer | BS31 is an oxidation and heat resistant elastomer. It has a good balance of chemical resistance to both acids and hydrocarbons. |
Horizontal Centrifugal Slurry Pump
1. Durable slurry pump used for mines and industry solids pumping.
2. Wearing parts are made of Anti-abrasive ultral Cr alloy or rubber.
3. Slurry pump drive module design which makes the spare parts can be changed easily
4. Designed and built for long time with low maintenance for the Heavy brand slurry pump
5. Equipped the electric motor or diesel engine with slurry pump according to your requirement
6. Long service life for the wet parts of slurry pump.
The Features:
1. The wet parts for slurry pump are made of wear-resistant chromium alloy.
2. Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices for the slurry pump.
6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.
){kind=link}