High Chrome Alloy Sand Suction Centrifugal Pump

• Max.Head: 110m-150m
• Max.Capacity: 300-400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Model NO.: BL
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pumps
• Material: High Chrome Alloy or Natural Rubber
• OEM: Yes
• Factory: Yes
• Interchangeable: Yes
• Seal Form: Mechanical Seal, Expeller Seal, Packing Gland
• Name: High Chrome Alloy Sand Suction Centrifugal Slurry
• Transport Package: Wooden Case or as Required
• Trademark: Boda
• Origin: Shijiazhuang, Hebei China
• HS Code: 8413709990
• Production Capacity: 50sets/Month

Product Description

BL Series Profile:

• Discharge Diameters 3" to 18" (75mm to 450mm)
• Heads Through 180ft (55m)
• Flow-rates Through 20,000gpm (4,600m3/h)
• Casing Pressure Tolerance 250psig (1,725kPa)

BL Series Features:

• VALUE  flow-rate and head delivered at reduced initial and life-cycle costs with greater efficiency  designed for Class III and below slurries, retaining the ruggedness of a heavy-duty slurry handling unit
• WETTED PARTS
  • IMPELLERS  higher efficiency rates (up to 90+ %)  pump out vanes on rear and front (on closed impellers) reduce recirculation within pump, and aid in preventing seal contamination
  • LINERS  wide variety of metallurgic and elastomeric options (metal and elastomer interchangeable) active engineered attachment mechanism to casing via threaded bolts as opposed to unreliable glue
  • THROATBUSH  wide variety of metallurgic and elastomeric options (metal and elastomer interchangeable) adjustable via cotters to account for wear over time and increase efficiency
  • CHEMICAL COMPATIBILITY  operating pH range from 3 to 14 especially corrosive chemicals handled using diverse variety of elastomeric wetted parts
•          SEALS  offers a wide variety of seal options to suit any process requirements
  • EXPELLER (CENTRIFUGAL SEAL)  available with low flow water flush or zero flow (grease lubricated) options to provide exceptional sealing where water introduction to the seal is intolerable or limited
  • STUFFING BOX  gland sealing with packing and lantern ring
  • SCHURCO LOW-FLOW SEAL  offers a variety of low-flow seals, which can significantly reduce water usage in the stuffing box the low-flow seal systems can be applied in a variety of applications using several material and component options
• BEARING ASSEMBLY  all bearings assembled with highest quality tapered roller bearings in controlled environments to prevent lubricant and housing contamination oversized shaft diameters and reduced overhang in the wet end contribute to long life and reliability in the field
• CASING  split-case design allows for ease of access and maintenance on wet end parts cast ductile iron with exterior ribbing provides increased pressure ratings and reliable service over time
• BASE  a single piece base with integrated adjustment mechanism for impeller clearance within pump bearing assembly locks into base using four heavy-duty bolts three custom designed mounting modes available: overhead using integrated single pedestal system, side-by-side with adjustable motor mount, and direct-coupled with precision in-house alignment (optional VFD packages available)

Typical BL Series Applications:

Mineral Processing Coal Prep Aggregate Processing Fine Primary Mill Grinding Chemical Slurry Service Tailings Secondary Grinding Industrial Processing Pulp And Paper Food Processing Cracking Operations Ash Handling