Overview
By researching advanced ceramic, HONGYUAN developed this new kind of light duty slurry pump. It is mostly used for phosphorus chemical industry, Flow gas desulphurization for steel mill, and other kind of corrosion media with small size particles.
Feathures
| Structure |
Single flow passage centrifugal pump |
| Material of wet-end components |
Silicon carbide(SiC) Ceramic |
| Stage |
Single |
| Standard |
DIN24256,higher than DIN24256 |
| Efficiency |
A standard of slurry pump |
| Density of SiC ceramic impeller is much smaller than metal, so the shaft rotates smoothly. |
| There are different kinds of sealing. Gland seal, Mechanical seal, Expeller seal and so on can be chosen depending on different working condition. |
Application
SiC ceramic light duty slurry pump is a revolutionary product in pump industry, which can be used to convey many kinds of acid, alkali corrosion slurry, and other kinds of special industry.
| Flow Q |
5 ~ 1300 m3/h |
| Head |
5 ~ 170 m |
| Outlet Diameter |
50 ~ 250m |
| PH Value |
2.5 ~ 13 |
| Cl- Concentration |
≤60000ppm |
| Weight Concentration Cw |
≤60% |
| Media Temperature |
≤120°C |
| Density of SiC ceramic impeller is much smaller than metal, so the shaft rotates smoothly. |
| There are different kinds of sealing. Gland seal, Mechanical seal, Expeller seal and so on can be chosen depending on different working condition. |
Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
){kind=link}