| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Special rotor pump for drainage pump truck
1. Emergency flood control rescue and drainage truck and pump truck matching
2. Supporting drainage and desilting robots
3. Crawler emergency vehicle matching
4. Supporting mine drainage equipment
5. Sewage suction truck matching
6. Firefighting foam pump truck matching
7. Mobile sewage treatment vehicle supporting equipment
8. Mobile feces purification vehicle accessories
9. Pipe dredging trucks, cleaning sewage suction trucks, desilting trucks, and combined sewage suction trucks.
Large flow rate: the maximum flow rate of a single pump can reach 1600m3/h, and the maximum flow rate of stacked pumps can reach 3200m3/h.
High lift: the maximum lift can reach 250 meters (the maximum pressure can reach 25bar)
Self-priming strength: vertical self-priming height 8-9.5 meters, horizontal self-priming up to 30m
Fast water loading: water loading in as little as 7 seconds after the engine is started
Stable lift: the flow rate does not decrease, the rated flow rate is guaranteed, and the lift does not decrease
Easy to adjust: The flow rate is proportional to the rotation speed. You can easily adjust the pump flow rate by adjusting the engine or motor speed.
Can be idle: the cam pump can be idle for a short period of time
No clogging: The maximum passing diameter is 16cm, which can pass through plastic bags, floating objects, rags, weeds, branches, stones and other debris.
No bottom valve: The pump has good self-priming performance and can directly pump low water level liquids without installing a bottom valve.
No vacuum auxiliary equipment: no need for vacuum auxiliary equipment, fast stroke self-priming vacuum, good self-priming effect
working principle
The rotary cam pump is driven by two parallel shafts, which rotate relative to each other driven by synchronized gears. The rotor is mounted on the shaft, and a small cavity is formed between the rotor and the pump casing. The geometry of the rotor has been specially designed. Regardless of the position of the rotor, the pressure side and suction side of the pump are completely isolated.
During operation, the medium is continuously filled in the small cavity formed between the rotor and the pump shell. As the rotor rotates, the medium is continuously pushed from the suction end to the discharge end. The pump discharge and suction sides are always sealed by the rotor, so no valves are required. The squeezing and shearing of the medium by the pump is extremely small and can be ignored, and there is almost no pulsation. The rotor is made of wear-resistant rubber, plastic and metal. By changing the direction of rotation of the rotor, the flow direction of the medium is reversible. BODA rotary lobe pumps are therefore ideally suited for reverse operation
| English Name 1 | Special rotor pump for drainage pump truck |
| English Name 2 | Special rotor pump for drainage pump truck Spare Parts |
| Using | Mining |
| Material | Stainless Steel 316/316L 2205 Rubber |
| Advantage | Acid and alkali resistance |
Structure and composition
Pump cover, axial and radial protective linings, cam rotor, mechanical seal, non-flow pump shaft, integral cast pump casing, intermediate isolation chamber, bearings and synchronization gears, reduction gears (optional)
Featured Cam Rotor
Computer-aided cam rotors ensure
Its precise geometry and cam rotor perfectly seal the inlet and outlet of the pump. The structure and material of the cam rotor can be selected according to the characteristics of the transported medium. Therefore, we can provide you with a variety of rotor materials to fully meet your application process.
Among them, the drainage industry mainly uses fully rubber-coated wide-sided low-pulsation rotors, and the rotor core does not come into contact with the medium.
BODA's wide-edge rotor has a large area of sealing surface, which makes it more stable under high-pressure operation, has better wear resistance, better self-priming effect and other technical advantages.
we are Shijiazhuang Boda Industrial Pump Co.,Ltd from china .
We mainly operate slurry pumps, pump driven equipment, pump parts & resistance-wearing castings.
We can do OEM for buyers .
We can produce products according to buyers' drawings .
We can keep products quality ,material ,shipping and offer good service on after sales .
We can do many materials for rubber and metallic Spare Parts .
){kind=link}