Ceramic Slurry Pump Parts

• After-sales Service: Yes
• Warranty: Yes
• Max.Head: 80-110m
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BH
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pumps
• Material: Sic Ceramic
• OEM: Yes
• Interchangeable: Yes
• Factory: Yes
• Application: Mineral Processing&Tailings
• Size Range: 1.5/1′′-12/10
• Delivery Details: Within 10 Days After We See Your Deposit
• Name: Ceramic Slurry Pump Parts
• Type: Closed Impeller/Open Impeller
• Loading Port: Tianjin Xingang
• Pump: Slurry Pump
• Pump Parts: Slurry Pump Parts
• Slurry Pump Seal Form: Mechanical Seal, Expeller Seal, Gland Packing
• Slurry Pump Drive Form: Dcz, Zvz, Crz, CV, Cvl
• Slurry Pump Parts: Horizontal Slurry Pump Parts
• Transport Package: Wooden Case or as Required
• Specification: as your requirement
• Trademark: boda
• Origin: Shijiazhuang, China
• HS Code: 8413910000
• Production Capacity: 1000PCS/Month
• Package Size: 50.00cm * 50.00cm * 30.00cm
• Package Gross Weight: 80.000kg

Product Description

Ceramic Slurry Pump Parts:

The impeller is the main rotating component which normally has vanes to impart and direct the centrifugal force to the liquid.

Closed Impeller

Impellers are generally closed because of higher efficiencies and are less prone to wear in the front liner region.

Efficiency Francis Vane

Some advantages of the Francis vane profile are the higher efficiency, improved suction performance and slightly better wear life in certain types of slurry because the incidence angle to the fluid is more effective.

Concave Designed

The impeller is concaved designed, the pressure around the shrouds will be lower, so it will have a better wear performance.

Material

The wet parts are made of silicon carbide ceramic by sintering processing, which will give the pump exccellent wear and corrosion resistan performance, and it can also resistant impact by large particles(<15mm) in slurry. These are what metal alloy pump can not do.
- Wear resistant
- corrosion resistant
- Stand impact


In slurry pump, Wet Parts means the lining parts which contact with fluid media, usually it include impeller, volute, frame plate, throat bush. There parts will easily get corrosived or abrasived when working and get repalced every periods.
Usually the pump parts are made of iron, steel, bronze, brass, aluminum, plastic etc. For Slurry pumps they are normally made of High chrome alloy, elastomer, polyurethane, ceramic and some other customed. But High chrome alloy and elastomer are now the main material for the slurry pumps. Recent years some companies are trying to make wet parts by ceramics and many data come from labs and mills show that the ceramic wet parts can work for a longer time than high chrome alloy.
 
For chrome alloy material, the common type is High chrome Alloy(27%Cr), it can be used from Ph 5 to 12, and its hardness can be to HRC58, which is a very good choice for slurry control and transport. But in some conditions, the Ph may lower than 5, then we try A49, it can lower to Ph4, mostly used in FGD processing.
The elastomer are widely used in fine slurry conditions and lower Ph to 2. There are also many rubbers for different conditions, such as R08, R26, R55, S02, etc.
And recently, Polyurethane becomes popular in some conditions. It is good at corrosion and wear conditions.
 
What's more Ceramic material for slurry pump is perfect to replace elastomers and polyurethane in some condition. High Hardness and great corrosion make it even can replace the metal impeller in some conditions.
The most important things for stopping ceramic slurry pump to replace other ones are the price and friability. But some companies have solved these problems, that is to say some companies have made it success to manufacturing ceramic slurry pump that can stand impact by particles in the fluid media and the pump is not such expensive.
FAQ
1. What Products does BODA pump mainly produce? 
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample. 

2. Is BODA direct factory or trader? 
BODA own foundry workshop, Machining Workshop, and Assembly workshop. 
Welcome to visit our factory anytime. 

3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump


4. What information is required for quotes? 
If you need the spare parts, we need to know the parts Code and material. 

If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better. 

Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa