High Quality Horizontal Centrifugal Slurry Pump Product Description
1. General
ZJ
slurry pump is high efficiency, energy saving, wear-resisting products, according to the principle of minimum loss design, easy selection, vibration light, low noise. This series of pump flow components using high hardness alloy hybrid material, high abrasion resistance, impact resistance, so as to increase the service life. The pump delivery of the largest concentrations: Mortar 45%, 60% of the pulp. Drive form can use direct coupling, belts, hydraulic, frequency control of motor speed and so on, also may in series or parallel. Shaft seal form mainly pay impeller and packing and mechanical seal. Pump head structure for double hull vertical open, outlet position according to 45 degrees of interval rotating eight different position installation and use.
2.
Horizontal Centrifugal Slurry Pump Notation
200ZJ-I-A60
200-Discharge diameter(mm)
ZJ-Type
I-Single or primary pump
A-Impeller blade number
60-Impeller diameter(mm)
Horizontal Centrifugal Slurry Pump
| Type |
Speed |
Capacity |
Head |
NPSH |
| Rpm |
M³/h |
M |
M |
| 300ZJ-I-100A |
490/590 |
758-1826 |
40.9-65.2 |
3-4.1 |
| 300ZJ-I-95A |
490/590 |
720-1735 |
36.9-58.8 |
3-4.1 |
| 300ZJ-I-90A |
590/730 |
745-1844 |
46.2-79.9 |
3.9-5.7 |
| 300ZJ-I-85A |
590/730 |
704-1742 |
41.2-71.3 |
3.8-5.6 |
| 300ZJ-I-70A |
730/980 |
945-2333 |
35.5-76.8 |
3.9-7 |
| 300ZJ-I-65A |
730/980 |
877-2166 |
30.6-66.2 |
3.7-6.6 |
| 300ZJ-I-56A |
730/980 |
588-1568 |
21.5-46 |
3.5-5.5 |
| 250ZJ-103A |
590/730 |
593-1573 |
64.6-110.5 |
2.8-4.3 |
| 250ZJ-I-96A |
590/730 |
595-1466 |
55.2-93.7 |
3.5-5.5 |
| 250ZJ-I-90A |
590/730 |
558-1374 |
48.5-82.4 |
3.4-5.3 |
| 250ZJ-I-85A |
730/980 |
560-1504 |
66.8-128.7 |
3.5-5.5 |
| 250ZJ-I-83A |
730/980 |
547-1469 |
63.7-122.7 |
3.5-5.5 |
| 250ZJ-I-80A |
730/980 |
527-1416 |
59.2-114 |
3.4-5.4 |
| 250ZJ-I-78A |
730/980 |
514-1380 |
56.3-108.4 |
3.2-5.1 |
| 250ZJ-I-75A |
730/980 |
447-1480 |
46.2-97.5 |
3-4.1 |
| 250ZJ-I-73A |
730/980 |
435-1441 |
43.8-92.4 |
3-4.1 |
| 250ZJ-I-70A |
730/980 |
417-1381 |
40.2-84.9 |
2.9-3.9 |
| 250ZJ-I-68A |
730/980 |
405-1342 |
38-80.1 |
2.7-3.7 |
| 250ZJ-I-65A |
730/980 |
445-1249 |
34.1-71 |
3-4.5 |
| 250ZJ-I-63A |
730/980 |
431-1211 |
32-66.7 |
3-4.5 |
| 250ZJ-I-60A |
730/980 |
411-1153 |
29.1-60.5 |
2.8-4.2 |
| 200ZJ-I-85A |
730/980 |
329-907 |
71-133.7 |
2.8-5 |
| 200ZJ-I-75A |
730/980 |
335-900 |
50.5-102.9 |
3-4.5 |
| 200ZJ-I-73A |
730-980 |
326-876 |
47.8-97.5 |
3-4.5 |
| 200ZJ-I-70A |
730/980 |
305-976 |
43.1-86.4 |
2.8-3.8 |
| 200ZJ-I-68A |
730/980 |
296-948 |
40.7-81.5 |
2.8-3.8 |
| 200ZJ-I-65A |
730/980 |
350-950 |
36.4-72 |
2.5-4.3 |
| 200ZJ-I-63A |
730/980 |
339-921 |
34.2-67.6 |
2.5-4.3 |
| 200ZJ-I-60A |
730/980 |
324-870 |
30.8-62 |
2.5-4 |
| 200ZJ-I-58A |
730/980 |
313-841 |
28.8-57.9 |
2.5-4 |
| 150ZJ-I-70A |
730/980 |
139-401 |
44.3-91.2 |
2-3 |
| 150ZJ-I-65A |
730/980 |
223-600 |
38.5-75.7 |
2.5-4 |
| 150ZJ-I-63A |
730/980 |
216-582 |
36.2-71.1 |
2.5-4 |
| 150ZJ-I-60A |
730/980 |
201-550 |
32.6-63.5 |
2.5-3.8 |
| 150ZJ-I-58A |
730/980 |
194-532 |
30.5-59.3 |
2.5-3.8 |
| 150ZJ-I-55A |
730/980 |
184-504 |
27.4-53.4 |
2.3-3.5 |
| 150ZJ-I-58C |
730/980 |
200-596 |
28.4-61 |
2-3.2 |
| 150ZJ-I-57A |
730/980 |
142-427 |
29.4-56.3 |
1.8-2.9 |
| 150ZJ-I-50A |
730/980 |
171-460 |
21-43.1 |
2.5-3 |
| 150ZJ-I-48A |
730/980 |
164-442 |
19.4-39.7 |
2.5-3 |
| 150ZJ-I-42C |
980/1480 |
199-550 |
23.8-62.8 |
2.2-4.5 |
| 100ZJ-I-50A |
980/1480 |
119-360 |
40.2-100.2 |
2.5-4.5 |
| 100ZJ-I-46A |
980/1480 |
109-331 |
34-84.8 |
2.3-4.2 |
| 100ZJ-I-42A |
980/1480 |
93-275 |
28.7-70.8 |
2.5-4 |
| 100ZJ-I-39A |
980/1480 |
86-255 |
24.7-61 |
2.4-3.8 |
| 100ZJ-I-42B |
980/1480 |
64-205 |
24.7-70.7 |
1.8-2.8 |
| 100ZJ-I-36A |
980/1480 |
86-245 |
19-49.5 |
2-3.5 |
| 100ZJ-I-33A |
980/1480 |
79-225 |
16-41.6 |
1.8-3.2 |
| 80ZJ-I-52A |
980/1480 |
71-242 |
43.4-109.8 |
2.1-4.3 |
| 80ZJ-I-42A |
980/1480 |
86-204 |
28.1-70.4 |
2.5-4.2 |
| 80ZJ-I-39A |
980/1480 |
80-189 |
24.3-60.7 |
2.4-4 |
| 80ZJ-I-36A |
980/1480 |
65-190 |
18.7-51.4 |
2.5-3.7 |
| 80ZJ-I-33A |
980/1480 |
60-174 |
15.7-43.2 |
2.3-3.4 |
| 65ZJ-I-30A |
980/1480 |
31-79 |
13.8-34.8 |
2-3 |
| 65ZJ-I-27A |
980/1480 |
28-71 |
11.2-28.2 |
1.8-2.7 |
| 50ZJ-I-50A |
980/1480 |
38-111 |
43.8-110.7 |
3-3.8 |
| 50ZJ-I-46A |
980/1480 |
31-94 |
34.3-85.8 |
1.4-2.9 |
| 50ZJ-I-33A |
980/1480 |
17-54 |
14.5-42.5 |
2.9-6 |
| 40ZJ-I-17A |
1400/2900 |
4-23 |
9.1-44.6 |
2.5-4.5 |
Drive type of Centrifugal Slurry Pump:
DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.
CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.
CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.
Our service
1.Any inquires will be replied within 8 working hours.
2.Professional centrifugal pump manufacturer, welcome to visit our website (on-line store) and factory.
3.Customized design is available, OEM and ODM are welcomed.
4.High quality, reasonable & competitive price.
5.Fast lead time, 5-25days for bulk pump production
6.Payment: we usual accept payment by T/T, L/C and western union.
7.We have strong cooperation with forwarder, you also can chose your own shipping forwarder.
8.After-sale service: all centrifugal pumps will have been strictly quality checked in house before packing. All centrifugal pumps will be well packed as request before shipping.
FAQ
1. What Products does BODA pump mainly produce?
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample.
2. Is BODA direct factory or trader?
BODA own foundry workshop, Machining Workshop, and Assembly workshop.
Welcome to visit our factory anytime.
3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump
4. What information is required for quotes?
If you need the spare parts, we need to know the parts Code and material.
If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better.
Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa
){kind=link}