High effiency anti-abbrasive slurry pump spare parts
Brief introductions
Shijiazhuang Boda Industrial Pump Co., Ltd. Is the specialized manufactuer of slurry pumps in Shijiazhuang, China. Our products cover Slurry pump, Sand/Gravel pump, vertical slurry pump, froth pump and slurry pump spare parts.
Description of products
1. The slurry pump spare parts are made of high chromium alloy which has superior wear and corrosive resistance.
2. Non-Standard slurry pump spare parts & Different size available.
Main applications of slurry pump spare parts
This kind of slurry pump spare parts are mainly used infor handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.
Material
Materials |
Description |
Applications |
High Chrome |
Chrome content of 15%,27%,29%,30%,35% |
slurry pump, crusher,
coal mill and etc. |
Cast and
Ductile Iron |
HT200, HT250, QT500-7, QT400-12 and so on |
bearing housing,
base and etc. |
Stainless Steel |
304, 316, 316L, CD4MCu |
chemical industrial
equipment spares |
Rubber |
Natural rubber, Butyl, Neoprene, Hypalon
and so on |
slurry pump, cyclone
and so on |
Polyurethane |
Different hardness |
slurry pump, cyclone,
flotation and so on |
Ceramic |
Silicon carbide silicon nitride ceramic and
chromic oxide, aluminum oxide ceramic coating |
slurry pump |
Introduction of Centrifugal Slurry Pump :
1. Abrasion and corrosion resisting
2. Material: hard alloy metal(Cr27,Cr28, Cr30, CD4MCu) or rubber liner optional,
3. Shaft seal: packing seal, expeller seal, and mechanical seal.
4. Power driver: electrical motor or diesel engine.
Application of Centrifugal Slurry Pump :
Deliver slurry with hard particle, in the mining, metallurgy, coal washing, power plant, sewage water treatment, dredging, and chemical and petroleum industries
1. Conveying mortar,slag which are strong corrosive and with solid particles.
2. Widely used in extracting sand, marine reclamation land,power plant,mining.
Features of Centrifugal Slurry Pump :
- Multi-purpose sand and gravel pump, high efficiency and energy saving.
2. Horizontal, centrifugal, one stage, single casing slurry pump.
3. Distinctive innovation in hydraulic and structural design.
4. Pump discharge direction can be changed in any 45 degree,easy installation.
5. Long-term bearing life: The bearing assembly is composed of large diameter shaft
and short overhang.
Component of Centrifugal Slurry Pump:
1. All of the metal wet parts can are made of high chromium alloy which has superior wear and erosion resistance or grey iron which has a high rigidity.
2. As the expeller ring is assembled together with the expeller, much pressure can be reduced effectively for the impeller. Meanwhile, it can still maintain a reliable sealing performance.
3. The parts such as labyrinth, labyrinth lock nut, end cover and shaft sleeve are used for bearing assembly; these parts can be changed easily and have high accuracy and longer service life.
4. Some fastening parts such as studs and bolts can be used for fixing the other parts securely. All the fastening parts can be attached easily, ensuring the safety.
- All of the rubber parts have superior erosion resisting performance which can be used for a long life.
Drive type of Centrifugal Slurry Pump:
DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.
CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.
CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.
Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Slurry Pump Spare Parts
Slurry pump wet end parts mainly include Impeller, volute liner, Casing, shaft, throat bush, wear plate, case, cover, stuffing box, lantern restrictor, cover plate bolt, throat bush, shaft sleeve, cover plate liner, frame plate liner...
1.centrifugal slurry pumps and spare parts can fully interchange with world famous brand.
2.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer elastomer elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.
4.Wear -resistant Metal Liner and Rubber Liner available
5.Seal Type: gland seal , impeller seal and mechanical seal
6.Can be installed in multistage series
7.easy to maintenance
The properties of the rubber material:
We have variety of natural rubber and elastomers, which can be used for pumping corrosive or acid slurries. But the rubber material is not suitable for slurries which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.
The properties of the high chrome white iron:
We have variety of high chrome white iron, and the content of chrome is different.
They can offer excellent performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. The high wear resistance of alloy is provided by the presence of hard carbides within its microstructure. Some special high chrome alloy is also suited to application where corrosion resistance, as well as erosion resistance is required.
OEM Service
Based on many years of rich experience in slurry pump manufacturing and design, BODA can undertake OEM customization for the whole set of pump and various spare parts. The slurry pump spare parts can be made of various material according to customer's requirement, Such as: Alloy 20, Hastelloy Alloy, A (6 1 ) and so on.
Our company undertakes the design, processing and transformation of various special pump parts. According to the user's requirements, BODA Factory can manufacture various materials and components to meet the needs of different working conditions. Or in accordance with user requirements on the existing equipment technology transformation, combined with our company's rich hydraulic model, through advanced computer simulation technology, to provide users with a complete and effective solution.
Application:
The parts are widely used in Main Applications: Heavy Mining Mineral Processing Sand and Gravel Coal Prep Cyclone Feeds Aggregate Processing Fine Primary Mill Grinding Chemical Slurry Service Tailings Secondary Grinding Industrial Processing Pulp And Paper Food Processing Cracking Operations Ash Handling Pipeline Transport High Velocity Hydraulic Transport Food Processing Explosive Sludge In Metal Smelting River And Pond Dredging Heavy Refuse Removal Larger Particle Or Low NPSHA Applications Continuous (Snore) Sump Pump Operation Abrasive Slurries High Density Slurries Large Particle Slurries Sump Drainage Wash down Floor Drainage Mixing Iron Ore Cooper Diamond Alumina Coal Gold Kaolin Phosphorite Steel Palm Suger Chemical Power FGD Frac Sand Blending Construction City Sewage etc.
FAQ
Q: Are you trading company or manufacturer ?
Q: How long is your delivery time?
A: Generally it is 30-50 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: How to choose proper models from us?
A: Accordting to the capacity and the lifting head, please see the chart first and then choose proper models. And please let us know the details, we will help you.
Q: What is your terms of payment ?
A: 30%TT in advance as deposit, 70% left balacing before shipping by TT or LC at sight.
Q: what is the warrantee time?
A: Normally one year after shipping.
){kind=link}