| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Application and features:
Type BL pumps are cantilevered, horizontal, centrifugal slurry pumps.They are suitable for delivering low abrasive, low density slurries for metallurgical, mining, coal and build material departments.The shaft seal is adopted both gland seal and centrifugal seal.
Type BL pumps are adopted high speed operating and so they have small volumes saving floor area.The frame plates have changeable, wear-resistant, metal liners or rubber liners and the impellers are made of wear-resistant metal or rubber (Rubber for frame plates, impellers of pumps with discharge dia. above 550mm.) The discharge position by request may be rotated 8 different angles at internal of 45 degrees for installation and application.
The pump type should be selected by reference to its performance curves and the selection of capacity range is between 40%~100%.(The corresponding capacity against the max.efficiency point at one speed is 100%.)
| English Name 1 | Slurry Pump Impeller |
| English Name 2 | Slurry pump spare parts |
| Using | Mining |
| Material | high chromium alloy |
| Advantage | Acid and alkali resistance, wear-resistant |
Horizontal Centrifugal Slurry Pump
1. Durable slurry pump used for mines and industry solids pumping.
2. Wearing parts are made of Anti-abrasive ultral Cr alloy or rubber.
3. Slurry pump drive module design which makes the spare parts can be changed easily
4. Designed and built for long time with low maintenance for the Heavy brand slurry pump
5. Equipped the electric motor or diesel engine with slurry pump according to your requirement
6. Long service life for the wet parts of slurry pump.
The Features:
1. The wet parts for slurry pump are made of wear-resistant chromium alloy.
2. Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices for the slurry pump.
6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.
Structure Drawing:
Section Chart:
Performance Table:
| Type | Allowable Mating Max. Power (Kw) |
Clear Water Performance | Impeller | ||||||
| Capacity/ Q m ³ /hr |
Head/m | Speed /rpm |
Max Efficiency /% |
NPSH /m |
Nos of Vane s | Impeller Diameter /mm |
|||
| 20A-BL | 7.5 | 2.34-10.8 | 6--37 | 1400--3000 | 30 | 4 | 152.4 | ||
| 50B-BL | 15 | 16.2--76 | 9--44 | 1400--2800 | 55 | 3.5--8 | 5 | 190 | |
| 75C-BL | 30 | 18-151 | 4--45 | 900--2400 | 57 | 3--6 | 4 | 229 | |
| 100D-BL | 60 | 50-252 | 7-46 | 800--1800 | 60 | 2--3.5 | 4 | 305 | |
| 150E-BL | 120 | 115--486 | 12-51.5 | 800--1500 | 65 | 2--6 | 4 | 381 | |
| 200E-BL | 120 | 234--910 | 9.5--40 | 600--1100 | 64 | 3-6 | 4 | 457 | |
| 250E-BL | 120 | 396--1425 | 8--30 | 500--800 | 77 | 2--10 | 5 | 550 | |
| 300S-BL | 560 | 468--2538 | 8--60 | 400--950 | 79 | 2-10 | 5 | 653 | |
| 350S-BL | 560 | 650--2800 | 10--59 | 400--840 | 81 | 3--10 | 5 | 736 | |
| 400ST-BL | 560 | 720--3312 | 7--51 | 300--700 | 80 | 2--10 | 5 | 825 | |
| 450 ST-BL | 560 | 1008--4356 | 9--48 | 300--600 | 80 | 2--9 | 5 | 933 | |
| 550 TU-BL | 1200 | 1980-7920 | 10-50 | 250-475 | 86 | 4-10 | 5 | 1213 | |
){kind=link}