| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ISG vertical pipeline centrifugal pump
Flow range: Q=5.6 ~ 720m3/h
Head range: H=5~125m
Conveying temperature: -20-150ºC (above 80ºC, please state)
Inlet pressure: 0-7.5MPa (please state when higher than 0.3MPa)
Sealing form: packing seal, mechanical seal
Pump material: HT200, HT250, QT600, ZG, 304, 316, 316L, 317L, 904L, CD4-MCu, etc
ISG vertical pipeline centrifugal pump IS the unit's scientific and technical personnel selected domestic excellent hydraulic model, using the performance parameters of IS type centrifugal pump, on the basis of general vertical pump clever combination design, at the same time according to the use of temperature, media and other different ISG based on the derived for hot water, high temperature corrosive chemical pump, oil pump. This series of products has the advantages of high efficiency and energy saving, low noise, reliable performance, etc. The products are designed and manufactured according to international ISO2858 standard.
For transporting water and other liquids with physical and chemical characteristics similar to water, suitable for industrial and urban water supply and drainage, pressurized water supply in high-rise buildings, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water cycle pressurization and equipment supporting, the use temperature T < 80ºC.
Structural characteristics
1, pump and motor with the same end cover, axial size is shortened, simple structure;
2, the pump body is provided with a pressure hole and a water hole;
3, the pump body is provided with an exhaust valve, the worker arrow can be discharged into the pump air;
4. The bottom of the pump body is provided with a mounting bottom plate and bolt holes to ensure the stable installation of the whole unit.
Type description
Example: ISG50-160(I)A(B);
50 - Pump inlet and outlet diameter of 50mm;
160 - the nominal outer diameter of the impeller is 160mm;
I - Traffic classification;
A - impeller diameter cutting code;
B - The impeller is cut a second time;
ISG - Single stage single pipette centrifugal pump;
IH type stainless steel chemical centrifugal pump
Flow range: 6.3 ~ 400m3/h
Lift range: 5~125m
Conveying temperature: -20-150ºC (above 80ºC, please state)
Inlet pressure: 0-7.5MPa (please state when higher than 0.4MPa)
Sealing form: packing seal, mechanical seal
Pump material: HT200, HT250, QT600, ZG, 304, 316, 316L, 317L, 904L
IH type single stage single suction cantilever chemical centrifugal pump is to replace F type corrosion resistant centrifugal pump energy saving, replacement products, the product is widely used in chemical, petroleum, metallurgy, paper, food, pharmaceutical, synthetic fiber and other industrial sectors, used to transport corrosive or do not allow pollution viscosity similar to water liquid. The inlet pressure of the pump shall not exceed 0.3MPa.
The temperature of the conveying medium is generally -20 ° C ~ 105 ° C, and appropriate cooling measures can be taken when necessary to transport higher temperature liquids.
Structure specification
The main parts are pump body, impeller, sealing ring, impeller nut, pump cover, sealing parts, intermediate support, shaft and suspension.
Structural characteristics
The pump cover is fixed on the middle support through the stop, and then the pump cover is clamped in the middle through the connection between the pump body and the stop of the middle support. Pump body is axial suction, radial discharge, foot support type, can be directly fixed on the base. The suspension components are fixed on the middle bracket through the stop and supported on the base by the suspension bracket. During maintenance, the inlet and outlet connection pipes, pump body and motor can be removed without disassembling, and the intermediate connection of the extended coupling can be removed to exit the rotor parts for maintenance.
The shaft seal has 9 forms such as packing and mechanical seal, which can be selected according to the nature of the conveying medium and the requirements of the production process.
The pump is connected to the motor by an extended coupling, and the pump rotates clockwise from the driving end.
Type description
Example: IH80-65-160A-304
IH - International standard chemical pump
80 - Pump inlet diameter is 80mm
65 - The pump outlet diameter is 65mm
160 - Nominal diameter of impeller is 160mm
A - Impeller outer diameter cutting code (A and B represent the first and second cutting respectively)
304 - Material code of pump contact parts: ZG0Cr18Ni9
| English Name 1 | IRG Type Vertical Hot Water Pipeline Centrifugal Pump |
| English Name 2 | Chemical Centrifugal Pump |
| Using | Used in chemical, petroleum, metallurgy, paper, food, pharmaceutical, synthetic fiber and other industrial sectors, used to transport corrosive or do not allow pollution viscosity similar to water liquids. The inlet pressure of the pump shall not exceed 0.3MPa. |
| Material | HT200,HT250,QT600,ZG,304,316,316L,317L,904L |
| Advantage | Used to transport liquids of a viscosity similar to water that are corrosive or impermissible to contamination |
Product Overview: IH type pump is a horizontal single-stage single-suction water centrifugal pump, for suction and delivery of water and physical and chemical properties similar to water without solid particles of liquid. It is widely used in industry, agriculture and cities, drainage, fire water supply and so on.
The IH pump system is designed according to the performance and size specified in the international standard ISO2858, and its technical standards are close to international standards, reaching the international advanced level. It is one of the energy-saving pump products promoted in our country. The pump has the advantages of simple structure, reliable performance, small size, light weight, good corrosion resistance, low power consumption and easy maintenance.
Scope of use:
1, suitable for urban environmental protection, construction, fire, chemical, pharmaceutical, dyes, printing and dyeing, brewing, electricity, electroplating, paper making, petroleum, mining, equipment cooling, oil tanker unloading and so on.
2, suitable for water, sea water and chemical medium liquid with acid, alkalinity and general paste slurry (medium viscosity ≤100 centiper cent, solid content up to 30%).
we are Shijiazhuang Boda Industrial Pump Co.,Ltd from china .
We mainly operate slurry pumps, pump driven equipment, pump parts & resistance-wearing castings.
We can do OEM for buyers .
We can produce products according to buyers' drawings .
We can keep products quality ,material ,shipping and offer good service on after sales .
We can do many materials for rubber and metallic Spare Parts .
){kind=link}