Feeding Horizontal Screw Pump for Food Produce

• After-sales Service: 1 Years
• Warranty: 1 Years
• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Model NO.: BD- Feeding horizontal screw pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Closed
• Usage: Pump, Circulating Pump
• Producer: Boda Pump
• Wet Parts: SS304 /SS316 /Rubber
• Shipping Type: Many Type
• Packing: Wooden Box
• Transport Package: Wooden Box
• Specification: cast Iron
• Trademark: BODA PUMP
• Origin: China
• HS Code: 8413910000
• Production Capacity: 2000

Product Description

English Name 1	Feeding Horizontal  Screw Pump
English Name 2	Screw Pump
Using	Mining Or Food Produce
Material	SS304 /SS316 /Rubber
Advantage	Acid and alkali resistance, wear-resistant

Feeding horizontal screw pump
The suction port is designed with a large hopper and is equipped with a screw blade propulsion device, which can effectively prevent the medium from accumulating at the pump inlet and solve the problem of material hanging on the wall. It is suitable for conveying materials with high viscosity, high solid content and other poor fluidity.
1. It can transport medium with high viscosity and poor fluidity (such as dewatered sludge, dry sludge, etc.)
2. A feeding screw is installed in the inlet chamber, which can achieve the best flow rate and low operating cost.
3. The design of the feeding screw will not cause the phenomenon of material bridge.
4. The size of the open square hopper can be customized according to the actual situation.
5. The helical blade extends to the customized inlet, and it is easier for the material to enter the stator sealing cavity.
Flow: ≤ 30m3/h
Working pressure: ≤ 2.4Mpa
Speed: ≤ 200 r/min
Use temperature: conventional 0-80 ºC, special materials up to 150 ºC
Viscosity: 1-1000000 mm2/s
Compared with vane pumps, screw pumps have the following advantages:
Low speed (generally 20r/min ~ 90r/min), small mechanical wear, will not occur cavitation.
The flow channel is wide and can transport water containing solid objects.
The pump structure is half-open, and the operation in the pump can be observed.
(4) Suction side flow pattern has little effect on hydraulic performance, there is no special requirement for suction pool, the foundation excavation depth is small, the hydraulic structure construction is simple, and the civil construction cost is low.
The disadvantages are:
Large size, covers a large area.
Limited by machining conditions, the pump shaft can not be too long, so the head is low, generally not more than 10m.
The height of the suction surface and the surface of the water can not change too much, otherwise it will affect the work efficiency and increase energy consumption.