Product Description
High effiency anti-abbrasive slurry pump spare parts
Brief introductions
Shijiazhuang Boda Industrial Pump Co., Ltd. Is the specialized manufactuer of slurry pumps in Shijiazhuang, China. Our products cover Slurry pump, Sand/Gravel pump, vertical slurry pump, froth pump and slurry pump spare parts.
BDTC4041-01 A05 back liners,BDTC4092-01 pump casing used for slurry pumps of TC type,Vertical Slurry Pumps.
BDTC4041-01 back liners is different with BDTC4041 back liners
BDTC4092-01 is little different with BDTC4092 pump casing
And we also produce other back liners and casings/pump impellers, pump volutes, and whole set pumps.
Our Advantages
Materials
High Chrome |
Chrome content of 15%,27%,29%,30%,35% |
slurry pump, crusher,
coal mill and etc. |
Cast and
Ductile Iron |
HT200, HT250, QT500-7, QT400-12 and so on |
bearing housing,
base and etc. |
Stainless Steel |
304, 316, 316L, CD4MCu |
chemical industrial
equipment spares |
Rubber |
Natural rubber, Butyl, Neoprene, Hypalon
and so on |
slurry pump, cyclone
and so on |
Polyurethane |
Different hardness |
slurry pump, cyclone,
flotation and so on |
Ceramic |
Silicon carbide silicon nitride ceramic and
chromic oxide, aluminum oxide ceramic coating |
slurry pump |
Main metal wetted parts are Impeller, Volute, Throat Bush, Frame Plate Liner Insert , Expeller, Expeller Ring... and they are made of high chrome alloy, 27%, anti-wear, anti-abrasive , ASTM 532,Class III, Type A and long service-life, allowable PH 5-12.
Product Parameters
Slurry pump Impeller is a rotor, rotating component of a centrifugal pump. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. It increase or decrease the pressure and flow of fluid.When the slurry pump processing the solid mixture, the most worn parts are impellers. Impeller is the most important part of a pump. It is heart of a Slury Pump. Materials are BDA05, BDA49, BDA33, BDA61 Natural Rubber, Polyurethane...etc, to meet different working duty.
There are main three type of slurry pump impeller, Open, Semi-open and Closed. We have types of vane impellers, such as two vane impeller, three vane impeller, four vane impeller, five vane impeller and six vane impeller. Regarding the material: BODA can offer high chrome alloy impeller, rubber impeller, polyurethane impeller and ceramic impeller.
Slurry Pump volute Liner is a curved funnel increasing in area to the discharge port. It is often used with impeller pumps. As the area of the cross-section increases, the volute reduces the speed of the liquid and increases the pressure of the liquid. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the pump. Materials are BDA05, BDA49,BDA33, Natural Rubber , Polyurethane...etc, to meet different working duty.
Quality metal wet parts quote usually refers to the metal parts inside the pump that are exposed to liquid. These parts are usually made of highly wear-resistant, high-strength metal materials, such as cast iron, high-chromium alloys, etc. Their features include:
Wear resistance: It is usually made of materials with high hardness and strong wear resistance, which can resist wear during liquid transportation and extend the service life of the pump.
Corrosion resistance: It has good corrosion resistance and is suitable for handling corrosive liquids to maintain the stability and reliability of the pump.
High strength: These Low price Metal wet parts usually have high strength and can withstand liquid pressure, ensuring the normal operation of the pump in high-pressure environments.
Thermal stability: This component can maintain stability in high-temperature environments and is suitable for scenarios where high-temperature liquids are handled.
Easy to repair: The structure of this component is relatively simple and easy to disassemble and replace, which reduces the difficulty and cost of maintenance and repair.
The customized metal wet parts are wear-resistant, corrosion-resistant, high-strength, and thermally stable, making them a key component of pumps in various industrial applications.
Our horizontal slurry pump parts and vertical sump pump spare parts are dimensionally interchangeable with Foreign slurry pump parts and other brand slurry pumps. And more, we accept pump parts OEM and ODM business, especially abrasion and corrosion pump parts. We have our own foundry and compound specialist to increase the wet parts wear life time, and they have been tested by end users plant of the most abrasive and most corrosive arduously applications. We also welcome the opportunity to discuss your applications in more detail. Our experienced technical engineers are always ready to give advice and make suggestions to improve future wear life of your slurry pumps. We are capable enough to help you work out a perfect casting material ingredient for your special slurries.
Drive type of Centrifugal Slurry Pump:
DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.
CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.
CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.
Main applications of slurry pump spare parts
Main Applications: Heavy Mining | Mineral Processing | Sand and Gravel |Coal Prep | Cyclone Feeds | Aggregate Processing | Fine Primary Mill Grinding | Chemical Slurry Service | Tailings | Secondary Grinding | Industrial Processing | Pulp And Paper | Food Processing | Cracking Operations | Ash Handling | Pipeline Transport | High Velocity Hydraulic Transport |Food Processing | Explosive Sludge In Metal Smelting | River And Pond Dredging | Heavy Refuse Removal | Larger Particle Or Low NPSHA Applications | Continuous (Snore) Sump Pump Operation | Abrasive Slurries | High Density Slurries | Large Particle Slurries | Sump Drainage | Wash down | Floor Drainage | Mixing | Iron Ore | Cooper | Diamond | Alumina | Coal | Gold | Kaolin | Phosphorite | Steel | Palm | Suger | Chemical | Power | FGD | Frac Sand Blending | Construction | City Sewage | etc.
Packaging & Shipping
Our Services:
1. We can produce the pump and spare parts according to clients' drawing or sample.
2. We help customers to select the type, size and operating speed of pumps that will perform at the lowest cost of ownership.
3. Interchangeable metal design allow best material choice for any application.
4. Perfect After-sales service and large stock for standard spare parts. We provide lifetime after-sale service to solve any problem during client's uses.
5. We offer Design, Installation, Repair and Maintenance solutions and Mine measuring up service.
Our products are CE, SGS and ISO9001 certified.
6. We always pay more attention to the quality of the slurry pump. Standard quality control system and team are responsible to ensure the product quality in every process with different instruments.
7. One year guarantee for whole machine except of the wet-end parts.
Certifications
FAQ
FAQ
1. What Products does BODA pump mainly produce?
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample.
2. Is BODA direct factory or trader?
BODA own foundry workshop, Machining Workshop, and Assembly workshop.
Welcome to visit our factory anytime.
3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump
4. What information is required for quotes?
If you need the spare parts, we need to know the parts Code and material.
If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better.
Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa
Audited Supplier 
){kind=link}
){kind=link}