Heavy Duty Sand Suction Dredger Pump for River

• Customization: Available
• After-sales Service: Yes
• Warranty: Yes
• Max.Head: 80-110m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Open or Closed
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Pump Outlet: 1 Inch--14inch
• Material: A05 A07 A49
• OEM: Yes
• Factory: Yes
• Drive Mothod: DC, Cr, CV, Zv
• Seal Method: Paking Seal, Mechanical Seal, Expeller Seal, etc
• Name: Molybdenum Mining Processing Metal Slurry Pump
• Application: Dredging
• Power: Diesel Engine or Electric Motor
• Slurry Pump: Dredging Sand Pump
• Dredging Pump: Slurry Pump Parts
• Transport Package: Wooden Case or as Required
• Specification: as your requirement
• Trademark: boda
• Origin: Shijiazhuang, Hebei
• HS Code: 8413709990
• Production Capacity: 300sets/Month
• Package Size: 100.00cm * 80.00cm * 60.00cm
• Package Gross Weight: 1000.000kg

Product Description

Slurry Pumps Used in mining chemical applications:

Type TZS, TZH pump are cantilevered, horizontal, centrifugal slurry water pumps, outlet from 25mm to 450mm. They are also named as heavy slurry pump because of bear-abrasive parts and heavy base.

The Features:
1. The frame plates for TZS pumps have replaceable wear-resistant metal liners or rubber liners. The impellers are made of wear-resistant metal or rubber. The frame plate liner and impeller for TZH pump are adoptable of hard metal only.
2. Bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices.
6. Wide performance, good NPSH and high efficiency. The pump of this type may be installed in multistage series to meet the delivery for long distance.
 
Application:
TZS, TZH pumps are used to pump high-hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc. in the industries of metallurgy, mining, coal, power, building material and etc. The temperature of the pumped solid-liquid mixture should be ≤80oC, and the weight concentration should be ≤60.

Slurry Pump Construction

Pump Body: Cast Iron/Grey Iron
Front Cover: High Chrome alloy/ Rubber lined

Impeller: High Chrome alloy/ Rubber lined
Mechanical Seal: Carbon/Ceramic/Stainless Steel
Motor Housing: Alloy Aluminum
Shaft: Carbon Steel/Stainless Steel/High Frequency Wedding Shaft
Insulation: Class B / Class F
Protection: IP54 / IP55/IP67
Cooling: water cooling

Type	Allowable Mating Max.Power(kw)	Clear Water Performance						Impeller
		Capacity  Q		Head H (m)	Speed n (r/min)	Max EFF η(%)	NPSH) (m)	No of Vanes	Impel Dia(mm)
		(m3/h)	(L/S)
20TZS-PB	15	12.6-28.8	3.5-8	6-68	1200-3800	40	2-4	5	152
40TZS-PB	15	32.4-72	9-20	6-58	1200-3200	45	3.5-8	5	184
50TZS-PC	30	39.6-86.4	11-24	12-64	1300-2700	55	4-6	5	214
75TZS-PC	30	86.4-198	24-55	9-52	1000-2200	71	4-6	5	245
75TZS-PD	60
100TZS-PD	60	162-360	45-100	12-56	800-1550	65	5-8	5	365
100TZS-PE	120
100TZS-PD	60	180-396	50-110	7-61	600-1600	55	3-8	4	372
100TZS-PE	120
150TZS-PE	120	360-828	100-230	10-61	500-1140	72	2-9	5	510
150TZS-PR	300
150TZS-PE	120	360-828	100-230	7-52	400-1000	70	2.5-6	4	536
150TZS-PR	300	360-828	100-230	7-52	400-1000	70	2.5-6	4	536
200TZS-PST	560	612-1368	170-380	11-61	400-850	71	4-10	5	686
250TZS-PST	560	936-1980	260-550	7-68	300-800	82	6	5	762
300TZS-PST	560	1260-2772	350-770	13-63	300-600	77	3-10	5	965
350TZS-PST	560	1368-3060	380-850	11-63	250-550	79	4-10	5	1067
350TZS-PTU	1200
200TZM-PE	120	540-1440	150-400	14-60	600-1100	73	4-10	5	549

Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.

Slurry Pump Spare Parts
Slurry pump wet end parts mainly include Impeller, volute liner, Casing, shaft, throat bush, wear plate, case, cover, stuffing box, lantern restrictor, cover plate bolt, throat bush, shaft sleeve, cover plate liner, frame plate liner...

1.centrifugal slurry pumps and spare parts can fully interchange with world famous brand. 
2.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries. 
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer elastomer elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.
4.Wear -resistant Metal Liner and Rubber Liner available
5.Seal Type: gland seal , impeller seal and mechanical seal
6.Can be installed in multistage series
7.easy to maintenance

The properties of the rubber material:
We have variety of natural rubber and elastomers, which can be used for pumping corrosive or acid slurries. But the rubber material is not suitable for slurries which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.
 

The properties of the high chrome white iron: 
We have variety of high chrome white iron, and the content of chrome is different. 
They can offer excellent performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. The high wear resistance of alloy is provided by the presence of hard carbides within its microstructure. Some special high chrome alloy is also suited to application where corrosion resistance, as well as erosion resistance is required. 

OEM Service
Based on many years of rich experience in slurry pump manufacturing and design, BODA can undertake OEM customization for the whole set of pump and various spare parts. The slurry pump spare parts can be made of various material according to customer's requirement, Such as: Alloy 20, Hastelloy Alloy, A  (6 1 ) and so on. 

Our company undertakes the design, processing and transformation of various special pump parts. According to the user's requirements, BODA Factory can manufacture various materials and components to meet the needs of different working conditions. Or in accordance with user requirements on the existing equipment technology transformation, combined with our company's rich hydraulic model, through advanced computer simulation technology, to provide users with a complete and effective solution.  


Application: 
The parts are widely used in Main Applications: Heavy Mining Mineral Processing Sand and Gravel Coal Prep Cyclone Feeds Aggregate Processing Fine Primary Mill Grinding Chemical Slurry Service Tailings Secondary Grinding Industrial Processing Pulp And Paper Food Processing Cracking Operations Ash Handling Pipeline Transport High Velocity Hydraulic Transport Food Processing Explosive Sludge In Metal Smelting River And Pond Dredging Heavy Refuse Removal Larger Particle Or Low NPSHA Applications Continuous (Snore) Sump Pump Operation Abrasive Slurries High Density Slurries Large Particle Slurries Sump Drainage Wash down Floor Drainage Mixing Iron Ore Cooper Diamond Alumina Coal Gold Kaolin Phosphorite Steel Palm Suger Chemical Power FGD Frac Sand Blending Construction City Sewage etc. 
 Our service
1.Any inquires will be replied within 8 working hours.
2.Professional centrifugal pump manufacturer, welcome to visit our website (on-line store) and factory.
3.Customized design is available, OEM and ODM are welcomed.
4.High quality, reasonable & competitive price.
5.Fast lead time, 5-25days for bulk pump production
6.Payment: we usual accept payment by T/T, L/C and western union.
7.We have strong cooperation with forwarder, you also can chose your own shipping forwarder.
8.After-sale service: all centrifugal pumps will have been strictly quality checked in house before packing. All centrifugal pumps will be well packed as request before shipping.

FAQ

1. What Products does BODA pump mainly produce? 

BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample. 

2. Is BODA direct factory or trader? 

BODA own foundry workshop, Machining Workshop, and Assembly workshop. 
Welcome to visit our factory anytime. 

3. The Min MQQ

The MQQ is one pcs spare parts or one set bare pump

4. What information is required for quotes? 

If you need the spare parts, we need to know the parts Code and material. 

If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better. 

Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa