Customization: | Available |
---|---|
After-sales Service: | Yes |
Warranty: | 1 Year Except Wetted Parts |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Application and Features:
Type BL. BM,.BH slurry pumps are cantilevered, horizontal, centrifugal slurry pumps.They are designed for the handling highly abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc.The pumps of this type also may be installed in multistage series.
The frame plates for the typeBL, BM, BH pumps have replaceable wear-resistant metal liners or rubber liners.The impellers are made of wear-resistant metal or rubber.
The shaft seals for type BM, BH, pumps may be adoptable of gland seal or expeller seal.The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Brief Introcustion to Pump Type Selection:
Refering to the performance curves of the pump the selected capacity range should be as follows:
Pump Type BM, BH: 40-80% for higher density, strong abrasive slurries
40-80% for medium density, medium abrasive slurries
40-120% for lower density, lower abrasive slurries
Structure Drawing:
Type BM BH |
Allowable Mating Max.Power (kw) | Clear Water Performance | Impeller | ||||||
Capacity Q | Head H (m) |
Speed n (r/min) |
Max EFF η(%) | NPSH) (m) |
No of Vanes | Impel Dia(mm) | |||
(m 3 /h) | (L/S) | ||||||||
1.5/1B-BH | 15 | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2-4 | 5 | 152 |
2/1.5B-BH | 15 | 32.4-72 | 9-20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 5 | 184 |
3/2C-BH | 30 | 39.6-86.4 | 11-24 | 12-64 | 1300-2700 | 55 | 4-6 | 5 | 214 |
4/3C-BH | 30 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 5 | 245 |
4/3D-BH | 60 | ||||||||
6/4D-BH | 60 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 5 | 365 |
6/4E-BH | 120 | ||||||||
6/4D-BH | 60 | 180-396 | 50-110 | 7-61 | 600-1600 | 55 | 3-8 | 4 | 372 |
6/4E-BH | 120 | ||||||||
8/6E-BH | 120 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 5 | 510 |
8/6R-BH | 300 | ||||||||
8/6E-BH | 120 | 360-828 | 100-230 | 7-52 | 400-1000 | 70 | 2.5-6 | 4 | 536 |
8/6R-BH | 300 | 360-828 | 100-230 | 7-52 | 400-1000 | 70 | 2.5-6 | 4 | 536 |
10/8ST-BH | 560 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 5 | 686 |
12/10ST-BH | 560 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 5 | 762 |
14/12ST-BH | 560 | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-10 | 5 | 965 |
16/14ST-BH | 560 | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 5 | 1067 |
16/14TU-BH | 1200 | ||||||||
10/8E-BM | 120 | 540-1440 | 150-400 | 14-60 | 600-1100 | 73 | 4-10 | 5 | 549 |
10/8R-BM | 300 |
Type BL | Allowable Mating Max. Power (Kw) |
Clear Water Performance | Impeller | ||||||
Capacity/ Q m ³ /hr |
Head/m | Speed /rpm |
Max Efficiency /% |
NPSH /m |
Nos of Vane s | Impeller Diameter /mm |
|||
20A-BL | 7.5 | 2.34-10.8 | 6--37 | 1400--3000 | 30 | 4 | 152.4 | ||
50B-BL | 15 | 16.2--76 | 9--44 | 1400--2800 | 55 | 3.5--8 | 5 | 190 | |
75C-BL | 30 | 18-151 | 4--45 | 900--2400 | 57 | 3--6 | 4 | 229 | |
100D-BL | 60 | 50-252 | 7-46 | 800--1800 | 60 | 2--3.5 | 4 | 305 | |
150E-BL | 120 | 115--486 | 12-51.5 | 800--1500 | 65 | 2--6 | 4 | 381 | |
200E-BL | 120 | 234--910 | 9.5--40 | 600--1100 | 64 | 3-6 | 4 | 457 | |
250E-BL | 120 | 396--1425 | 8--30 | 500--800 | 77 | 2--10 | 5 | 550 | |
300S-BL | 560 | 468--2538 | 8--60 | 400--950 | 79 | 2-10 | 5 | 653 | |
350S-BL | 560 | 650--2800 | 10--59 | 400--840 | 81 | 3--10 | 5 | 736 | |
400ST-BL | 560 | 720--3312 | 7--51 | 300--700 | 80 | 2--10 | 5 | 825 | |
450 ST-BL | 560 | 1008--4356 | 9--48 | 300--600 | 80 | 2--9 | 5 | 933 | |
550 TU-BL | 1200 | 1980-7920 | 10-50 | 250-475 | 86 | 4-10 | 5 | 1213 |
Slurry pump Impeller is a rotor, rotating component of a centrifugal pump. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. It increase or decrease the pressure and flow of fluid.When the slurry pump processing the solid mixture, the most worn parts are impellers. Impeller is the most important part of a pump. It is heart of a Slury Pump. Materials are BDA05, BDA49, BDA33, BDA61 Natural Rubber, Polyurethane...etc, to meet different working duty.
1. We can produce the pump and spare parts according to clients' drawing or sample.
2. We help customers to select the type, size and operating speed of pumps that will perform at the lowest cost of ownership.
3. Interchangeable metal design allow best material choice for any application.
4. Perfect After-sales service and large stock for standard spare parts. We provide lifetime after-sale service to solve any problem during client's uses.
5. We offer Design, Installation, Repair and Maintenance solutions and Mine measuring up service.
Our products are CE, SGS and ISO9001 certified.
6. We always pay more attention to the quality of the slurry pump. Standard quality control system and team are responsible to ensure the product quality in every process with different instruments.
7. One year guarantee for whole machine except of the wet-end parts.
FAQ
1. What Products does BODA pump mainly produce?