Gravel Pumps Product description:
Gravel pumps are designed for continously handling the most difficult hype BG(H) gigher abrasive slurries which contain too big solids to be pumped by common pump.They are suitable for delivering slurries in Mining, Explosive sludge in metal melting.Dredging in dredger and course of rivers, and other fields.Type BGH pumps are of high head ones.
Construction of this pump is of single casing connected by means of clamp bands and wide wet passage.The wet parts are made of Ni-hard and high chromium abrasion-resistance alloys.The discharge direction of pump can be oriented in any direction of 360 degree.This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion-resistance.
8/6 Gravel Pumps Structure drawing:
Performance Chart:
|
BG(H) Gravel Sand Slurry Pump Performance Table |
|
| |
Pump
Model |
Allowable
Max. Power |
Clear Water Performance |
|
|
Capacity Q |
Head
H(m) |
Speed
n(r/min) |
Max.Eff.
η% |
NPSH
(m) |
Impeller
Dia. |
|
m 3 /h |
l/s |
|
6/4D-BG |
60 |
36-250 |
10-70 |
5-52 |
600-1400 |
58 |
2.5-3.5 |
378 |
|
8/6E-BG |
120 |
126-576 |
35-160 |
6-45 |
800-1400 |
60 |
3-4.5 |
378 |
|
10/8S-BG |
560 |
216-936 |
60-260 |
8-52 |
500-1000 |
65 |
3-7.5 |
533 |
|
10/8S-BGH |
560 |
180-1440 |
50-400 |
24-80 |
500-950 |
72 |
2.5-5 |
711 |
|
12/10G-BG |
600 |
360-1440 |
100-400 |
10-60 |
400-850 |
65 |
1.5-4.5 |
667 |
|
12/10G-BGH |
600 |
288-2808 |
80-780 |
16-80 |
350-700 |
73 |
2-10 |
950 |
|
14/12G-BG |
600 |
576-3024 |
160-840 |
8-70 |
300-700 |
68 |
2-8 |
864 |
|
16/14G-BG |
600 |
720-3600 |
200-1000 |
18-44 |
300-500 |
70 |
3-9 |
1016 |
|
16/14TU-BGH |
1200 |
324-3600 |
90-1000 |
26-70 |
300-500 |
72 |
3-6 |
1270 |
|
18/16TU-BG |
1200 |
720-4320 |
200-1200 |
12-48 |
250-500 |
72 |
3-6 |
1067
|
Component of Centrifugal Slurry Pump:
1. All of the metal wet parts can are made of high chromium alloy which has superior wear and erosion resistance or grey iron which has a high rigidity.
2. As the expeller ring is assembled together with the expeller, much pressure can be reduced effectively for the impeller. Meanwhile, it can still maintain a reliable sealing performance.
3. The parts such as labyrinth, labyrinth lock nut, end cover and shaft sleeve are used for bearing assembly; these parts can be changed easily and have high accuracy and longer service life.
4. Some fastening parts such as studs and bolts can be used for fixing the other parts securely. All the fastening parts can be attached easily, ensuring the safety.
- All of the rubber parts have superior erosion resisting performance which can be used for a long life.
Drive type of Centrifugal Slurry Pump:
DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.
CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.
CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.
Horizontal Centrifugal Slurry Pump
1. Durable slurry pump used for mines and industry solids pumping.
2. Wearing parts are made of Anti-abrasive ultral Cr alloy or rubber.
3. Slurry pump drive module design which makes the spare parts can be changed easily
4. Designed and built for long time with low maintenance for the Heavy brand slurry pump
5. Equipped the electric motor or diesel engine with slurry pump according to your requirement
6. Long service life for the wet parts of slurry pump.
The Features:
1. The wet parts for slurry pump are made of wear-resistant chromium alloy.
2. Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices for the slurry pump.
6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.
FAQ
1. What Products does BODA pump mainly produce?
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample.
2. Is BODA direct factory or trader?
BODA own foundry workshop, Machining Workshop, and Assembly workshop.
Welcome to visit our factory anytime.
3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump
4. What information is required for quotes?
If you need the spare parts, we need to know the parts Code and material.
If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better.
Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa
){kind=link}