Shijiazhuang Boda Industrial Pump Co.,ltd is a professional slurry pump manufacturer in China.Our slurry pumps are manufactured to be the best standards, ensuring longer service life, higher performance, ease of operation and maintenance. The pumps are widely used in mining, construction, metallurgy, power plant, sewage water treatment, dredging, and chemical and petroleum industries.welcomt to visit our factory!
TZR series centrifugal slurry pumps and spare parts can fully interchage with world famous brand.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and impellers, which are all interchangeable within a common costing assembly.
Name: 4/3C-BH(R) Rubber Slurry Pump
Pump Type: Centrifugal
Power: Motor / Diesel
Discharge Size: 1-18 inch
Capacity: 0-1000(l/s)
Head: 0-70(m)
Introduction of Centrifugal Slurry Pump :
1. Abrasion and corrosion resisting
2. Material: hard alloy metal(Cr27,Cr28, Cr30, CD4MCu) or rubber liner optional,
3. Shaft seal: packing seal, expeller seal, and mechanical seal.
4. Power driver: electrical motor or diesel engine.
Application of Centrifugal Slurry Pump :
Deliver slurry with hard particle, in the mining, metallurgy, coal washing, power plant, sewage water treatment, dredging, and chemical and petroleum industries
1. Conveying mortar,slag which are strong corrosive and with solid particles.
2. Widely used in extracting sand, marine reclamation land,power plant,mining.
Features of Centrifugal Slurry Pump :
- Multi-purpose sand and gravel pump, high efficiency and energy saving.
2. Horizontal, centrifugal, one stage, single casing slurry pump.
3. Distinctive innovation in hydraulic and structural design.
4. Pump discharge direction can be changed in any 45 degree,easy installation.
5. Long-term bearing life: The bearing assembly is composed of large diameter shaft
and short overhang.
Component of Centrifugal Slurry Pump:
1. All of the metal wet parts can are made of high chromium alloy which has superior wear and erosion resistance or grey iron which has a high rigidity.
2. As the expeller ring is assembled together with the expeller, much pressure can be reduced effectively for the impeller. Meanwhile, it can still maintain a reliable sealing performance.
3. The parts such as labyrinth, labyrinth lock nut, end cover and shaft sleeve are used for bearing assembly; these parts can be changed easily and have high accuracy and longer service life.
4. Some fastening parts such as studs and bolts can be used for fixing the other parts securely. All the fastening parts can be attached easily, ensuring the safety.
- All of the rubber parts have superior erosion resisting performance which can be used for a long life.
Drive type of Centrifugal Slurry Pump:
DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.
CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.
CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.
Performance Table:
|
Model |
Q(m3/h) |
H(m) |
Speed (r/min) |
Max. eff.
(%) |
NPSHr(m) |
Allowable max. particle size (mm) |
|
25TZR-PB |
12.6-28.8 |
6-68 |
1200-3800 |
40 |
2-4 |
14 |
|
40TZR-PB |
32.4-72 |
6-58 |
1200-3200 |
45 |
3.5-8 |
36 |
|
50TZR-PC |
39.6-86.4 |
12-64 |
1300-2700 |
55 |
4-6 |
48 |
|
75TZR-PC |
86.4-198 |
9-52 |
1000-2200 |
71 |
4-6 |
63 |
|
100TZR-PE |
162-360 |
12-56 |
800-1550 |
65 |
5-8 |
51 |
|
150TZR-PE |
360-828 |
10-61 |
500-1140 |
72 |
2-9 |
100 |
|
200TZR-PST |
612-1368 |
11-61 |
400-850 |
71 |
4-10 |
83 |
|
250TZR-PST |
936-1980 |
7-68 |
300-800 |
80 |
3-8 |
100 |
|
300TZR-PST |
1260-2772 |
13-63 |
300-600 |
77 |
3-10 |
150 |
|
350TZR-PTU |
1368-3060 |
11-63 |
250-550 |
79 |
4-10 |
160 |
|
450TZR-PTU |
520-5400 |
13-57 |
200-400 |
85 |
5-10 |
1, What information is needed to offer a slurry pump?
The pump model or the below information:
Liquid:___
Capacity:___ m3/hr
Head: ___ m
PH:___
Specific of gravity:___
Voltage:___V, Frequency:___hz
2, What material pump can you supply?
Cr26,High Chrome Alloy, Natural rubber, ceramics, polyurethane etc.
3, Can you supply special or OEM parts?
Yes, please send me the detailed drawing or parts code to check.
4, Do you only supply pumps? Could you supply driven equipment?
Yes, sure ,the pumps could be coupled with motor and diesel engine, below brands for your reference:
Motor: WEG, SIMENS ,ABB, TECO ,and Chinese brands
Diesel engine: Cummins, Deutz, Perkins,Volvo,MITSUBISHI, Caterpiller,MTU,and Chinese brands.
5, What is the delivery time?
10days for normal pumps.
Audited Supplier 
){kind=link}