8/6 Slurry Pump High Chrome Alloy Expeller Ring

• After-sales Service: Yes
• Warranty: 1 Year
• Max.Head: 50-80m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Model NO.: 8/6
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pumps
• Material: High Chrome Alloy
• OEM: Yes
• Interchangeable: Yes
• Factory: Yes
• Application: Mineral Processing&Tailings
• Size Range: 1.5/1′′-20/18′′
• Orgin: Hebei China
• Type: Closed Impeller/Open Impeller
• Loading Port: Tianjin Xingang
• Part Name: 8/6 Slurry Pump High Chrome Alloy Expeller Ring
• Transport Package: Wooden Case or as Required
• Specification: According to the situation
• Trademark: boda
• Origin: Shijiazhuang, China
• HS Code: 8413910000
• Production Capacity: 1000PCS/Month

Product Description

High effiency anti-abbrasive slurry pump spare parts
Brief introductions
Shijiazhuang Boda Industrial Pump Co., Ltd. Is the specialized manufactuer of slurry pumps in Shijiazhuang, China. Our products cover Slurry pump, Sand/Gravel pump, vertical slurry pump, froth pump and slurry pump spare parts.


1. The slurry pump spare parts are made of high chromium alloy which has superior wear and corrosive resistance.
2. Non-Standard slurry pump spare parts & Different size available.

Abrasion Resistant Cr Alloy Performance

Type	Material Code	Material Description	(MPa)	ak(J/cm2)	HRC	Special Performance	Application
Abrasion resistant white iron	B05	KmTBCr26	≥700	6-10	≥56	Anti-erosion performance <A07 with certain corrosion resistance	For higher wear condition 5-12 of PH
Abrasion resistant white iron	B07	KmTBCr15Mo	≥550	4-8	≥59	Best anti-erosion performance, corrosion resistance <A04, A05	For higher wear condition
Abrasion resistant white iron	B01	KmTBCr8	≥550	6-8	≥55	Anti-erision performance≈90% of A05	For mud pump
Abrasion resistant white iron	B11	KmTBCrMnMo	≥400	3-6	38-42	Low-grade anti-erosion performance, low hardness, drilling tapping	For microscale fine partical & low-grade abrasion working conditions
Anti-wear & anti-corrosive iron	B49		≥600		43-49	Abtu-erosion performance, corrosion stability, in low ph environment, abrasion resistance≈A03	For low-grade PH corrosive environment, expecially suitable fro FGD(PH≥4), Usually used for low acid enviroment
Anti-wear & anti-corrosive iron	B33				35	Anti-erosion performance≈A03 corrosion resistance	To transport oxidability slurry of PH valve≥1, such as phosphogypsum, HN03, H2SO4, H3PO4, etc.
	B22		1200		45	Excellent erosion resistance, higher hardness	For dredging pump casing
Anti-wear cast steel	B23		700		HB 500-600	Higher hardness and anti-erode	To transport higher anti-wear & anti-corrosive working condition, such as parts of dredging pump, clean water pump, sewage pump, certain parts of slurry pump
Anti-wear cast steel	B25				HB 300-350	Low hardness, higher abrasion resistace, good weldable performance	For light ecrode and wear condition such as transporting aqueous medium of small gravel

Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no
inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of
maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow
positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long
bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.


Main applications of slurry pump spare parts
This kind of slurry pump spare parts are mainly used in for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.

OEM Service
Based on many years of rich experience in slurry pump manufacturing and design, BODA can undertake OEM customization for the whole set of pump and various spare parts. The slurry pump spare parts can be made of various material according to customer's requirement, Such as: Alloy 20, Hastelloy Alloy, A (6 1 ) and so on. 

Our company undertakes the design, processing and transformation of various special pump parts. According to the user's requirements, BODA Factory can manufacture various materials and components to meet the needs of different working conditions. Or in accordance with user requirements on the existing equipment technology transformation, combined with our company's rich hydraulic model, through advanced computer simulation technology, to provide users with a complete and effective solution.  


Slurry Pump High Chrome Alloy Parts:

Horizontal Froth Slurry Pump Impellers :

 Froth Pump Parts: 







Slurry Pump Pu material Parts: 




FAQ

1. What Products does BODA pump mainly produce? 

BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample. 

2. Is BODA direct factory or trader? 

BODA own foundry workshop, Machining Workshop, and Assembly workshop. 
Welcome to visit our factory anytime. 

3. The Min MQQ

The MQQ is one pcs spare parts or one set bare pump

4. What information is required for quotes? 

If you need the spare parts, we need to know the parts Code and material. 

If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better. 

Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa