Horizontal Centrifugal Gold Mining Sludge Sump Solid Slurry Pump

Heavy Duty Slurry Pumps Working Range

Discharge Diameters 1" to 14" (25mm to 450mm)
Heads Range to 460ft (140m)
Flow Rate to 10,300gpm (2,339m3/h)

Type Z series Slurry Pump is a new energy-saving centrifugal pump. They are innovative in hydraulic designs, structural designs and materials of castings after integrating congeneric products throughout the world. They have many features: high efficiency, reasonable design, reliable operation, long in service time, easy maintenance, and low running costs and so on.

The Z series pumps are widely used for handling abrasive or corrosive slurries in power, metallurgical, mining, coal, as well as chemical industries. For example, flushing ash in power plants and pumping coal slurry in coal preparation plants. They are suitable for handling abrasive and corrosive solids-bearing slurry with maximum concentrations of wt.45%(ash) and wt.60%(ore).

Structural feature of Z series slurry pumps

Pump Body  It is a horizontal cantilevered slurry double-cases pump. The pump head includes cases, impeller, and shaft seal. Double-cases pump centrally split vertical spilt direction. Discharge port can be positioned at 8 different position at an interval of 45°. The outside cases made by HT200 or HT500-7, connecting with bolts. The inside cases (volute case, front liner, back liner) made by high-chrome alloy or rubber materials.

Impeller  Front and back cover plates with back vanes to reduce leakage and increase operating life, impeller and shaft is firmly connected by ladder-shaped with disassembly ring, "O" rubber ring is used between liner and volute casing and it is very convenient and reliable.

Shaft Seal  Expeller seal and packing seal.

Support  The supports can be lubricated by oil. Supports are made up with support body, support cover, shaft, bearing box, bearing, bearing cover, baffle sleeve, nut, oil seal wash plate and so on (See bellow). The supports have water-cooling above 150Z.

1. Coupling     2. Shaft     3. Bearing housing     4. Disassembly ring     5. Expeller
6. FPL insert      7. Volute casing      8. Impeller   9. Throat Bush    10. Pump cover
11.Rear casing    12. Stuffing box    13. Water-seal ring    14. Base   15. Support
16. Adjusting bolts     17. Inlet joint    18. Outlet joint

Feel free to contact us for additional info or for a free quote!

FAQ
1. What Products does BODA pump mainly produce? 
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample. 

2. Is BODA direct factory or trader? 
BODA own foundry workshop, Machining Workshop, and Assembly workshop. 
Welcome to visit our factory anytime. 

3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump 

4. What information is required for quotes? 
If you need the spare parts, we need to know the parts Code and material. 

If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better. 

Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa