Mining Pumps and Systems Slurry Pump
|FOB Price:||US $500-50,000 / set|
|Min. Order:||1 set|
|Min. Order||FOB Price|
|1 set||US $500-50,000/ set|
|Transport Package:||Wooden Case|
|Payment Terms:||L/C, T/T, D/P, Paypal, Western Union|
- Model NO.: ZJ
- Working Pressure: High Pressure Pump
- Position of Pump Shaft: Horizontal Pump
- Mounting Height: Suction Centrifugal
- Usage: Pumps
- Material: A05 A07 A49
- OEM: Yes
- Seal Form: Packing Seal with Expeller Seal
- Application: Mining, Mineral, Coal Plant, Chemical Plant, etc
- Solid Diameter: 1mm-400mm
- Origin: Shijiazhuang
- Impeller Number: Single-Stage Pump
- Influent Type of Impeller: Single Suction Pump
- Pump Casing Combined: Horizontal Split Pumps
- Impeller: Closed
- Discharge Diameter: 65-450mm
- Factory: Yes
- Fuel: Electric /Diesel
- Drive Form: Dcz Zvz CV Crz
- Duty: Heavy
- Trademark: Boda
- HS Code: 8413709990
Mining Pumps and Systems slurry pump
The ZJ(G) series slurry pump, which are created by Shijiazhuang Boda Industrial Pump Co., Ltd, is a new generation anti-wear, energy saving slurry pump. The ZJ(G) series pumps used international advanced solid-liquid two-phase flow theory and were designed using the minimum-wear principle. The flow parts of these pumps are suitable for the flow of state media for it's set shape, which reduces hydraulic loss of eddy and impact, both in pump and along the pipelines; So reduced friction of flow parts, lower noise and vibration of the pump translates into improved hydraulic efficiency.
The ZJ(G) series pumps are cased in hard-alloy which is a high anti-wear and high anti-corrosion impact resistance material, which means the pump will have a longer service life. In addition, this series pumps used an automatic reduced pressure system to avoid liquid leakage.
The ZJ(G) series slurry pumps are widely used in mining, metallurgy, power, coal and building material sectors. The ZJ(G) series pumps are suitable for handling abrasive and corrosive solids-bearing slurry with maximum concentrations of wt. 45% (ash) and wt. 60% (ore).
We have all kinds of ZJ(G) series slurry pumps, all of which can be made of directly driven (DC), directly driven via hydraulic coupling(HC), belt driven, and they can be operated in tandem and parallel positions according to the requirements of the customer.
200 Outlet diameter(mm)
ZJ denotes slurry pumps ( ZJL denotes vertical pumps, ZJD-single-case pumps)
(G) High-head (usually can be omitted)
I single stage pump ( II denotes th second stage pump)
A number of vanes of impeller ( A denotes 5 vanes, B--4 vanes, C--3 vanes, D--2 vanes)
60 External diameter of impeller (cm)
58 External diameter of impeller after incision (cm)
. Metallurgy and mine: Transport black and colored course-mine, fine-mine and slurry of end-mine, etc.
. Electric power: Transport ash mud&slurry in electric power, etc.
. Coal: Transport various course & fine coal mud, etc.
. Contructional material: Transport various slurry contain mud&sand, etc.
. Chemical industry departments: Transport every kinds of abrasive and corrosive slurry in the
Phosphorus and kalium manufactories, etc.
. Environmental protection: Flue gas desulfuration and transportation of gypsum mortar, etc.
The superior material & technique of wear-resistant:
Hydraulic adopted hydraulic design, wear abrasion of pump parts can be improved
Effectively. It is most important for the lifetime of pump that if selected material is fit for
The liquid. According to the concrete circumstance of each conditions, our limited
Analyzes seriously its basic wear mechanism & wear regulation, selects suitable serial
A material of wear-resistant & corrosion-resistant or other metal & nonmetal wear-resistant material for wear flow parts so as to combine the operation request of pump
And the select parts best to get super operation benefit.
The wear abrasion is various. Usually serials A material of wear- resistant & corrosionresistant is selected to transport liquid according to its quality,
Grain diameter, corrosive performance, temperature and etc. It is serials antiwear
Material which is introduced and developed by ourselves according to practice
Experience of 50 years. Its hardness is HRC35-68, and has more than 30 types such as type antiwear, type antiwash, type anticorrosion,
Type special acid and etc. They can be selected by customers.
Among others, our company based on the introduced technique, associates with
Internal firstclass colleges and institutes to develop wearresistant alloy cast iron of
A05, A07 and etc. Anti-wear can be enhanced 30% than regular similar materials.