Coal 6 inch metal mining liquid trasfer slurry pump
Application and Features:
Type BHH series slurry pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for the handling highly abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The pumps of this type also may be installed in multistage series.
The frame plate liner and impeller for BHH pump are adoptable of wear-resistant metal only.
The shaft seals for type BHH pumps may be adoptable of gland seal or expeller seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Brief Introduction to Pump Type Selection:
Refering to the performance curves of the pumpm the selected capacity range should be as follows:
Pump type BHH: 40%-80% for medium density, medium abrasive slurries
40%-100% for lower density, lower abrasive slurries
| Pump Model |
Allowable Max. Power(kw) |
Clear Water Performance |
|
| capacity Q |
Head H(m) |
speed n(r/min) |
Max.eff. η% |
NPSH (m) |
Impeller Dia(mm) |
| m3/h |
l/s |
| 1.5/1C-BHH |
30 |
16.2-34.2 |
4.5-9.5 |
25-92 |
1400-2200 |
20 |
2-5.5 |
330 |
| 3/2D-BHH |
60 |
68.4-137 |
19-38 |
25-87 |
850-1400 |
47 |
3-7.5 |
457 |
| 4/3E-BHH |
120 |
126-252 |
35-70 |
12-97 |
600-1400 |
50 |
2-5 |
508 |
| 6/4F-BHH |
560 |
324-720 |
90-200 |
30-118 |
600-1000 |
64 |
3-8 |
711 |
| 8/6S-BHH |
560 |
468-1008 |
130-280 |
20-94 |
500-1000 |
65 |
4-12 |
711
|
Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Slurry Pump Spare Parts
Slurry pump wet end parts mainly include Impeller, volute liner, Casing, shaft, throat bush, wear plate, case, cover, stuffing box, lantern restrictor, cover plate bolt, throat bush, shaft sleeve, cover plate liner, frame plate liner...
1.centrifugal slurry pumps and spare parts can fully interchange with world famous brand.
2.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer elastomer elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.
4.Wear -resistant Metal Liner and Rubber Liner available
5.Seal Type: gland seal , impeller seal and mechanical seal
6.Can be installed in multistage series
7.easy to maintenance
The properties of the rubber material:
We have variety of natural rubber and elastomers, which can be used for pumping corrosive or acid slurries. But the rubber material is not suitable for slurries which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.
Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Slurry Pump Spare Parts
Slurry pump wet end parts mainly include Impeller, volute liner, Casing, shaft, throat bush, wear plate, case, cover, stuffing box, lantern restrictor, cover plate bolt, throat bush, shaft sleeve, cover plate liner, frame plate liner...
1.centrifugal slurry pumps and spare parts can fully interchange with world famous brand.
2.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer elastomer elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.
4.Wear -resistant Metal Liner and Rubber Liner available
5.Seal Type: gland seal , impeller seal and mechanical seal
6.Can be installed in multistage series
7.easy to maintenance
The properties of the rubber material:
We have variety of natural rubber and elastomers, which can be used for pumping corrosive or acid slurries. But the rubber material is not suitable for slurries which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.
Our service
1.Any inquires will be replied within 8 working hours.
2.Professional centrifugal pump manufacturer, welcome to visit our website (on-line store) and factory.
3.Customized design is available, OEM and ODM are welcomed.
4.High quality, reasonable & competitive price.
5.Fast lead time, 5-25days for bulk pump production
6.Payment: we usual accept payment by T/T, L/C and western union.
7.We have strong cooperation with forwarder, you also can chose your own shipping forwarder.
8.After-sale service: all centrifugal pumps will have been strictly quality checked in house before packing. All centrifugal pumps will be well packed as request before shipping.
FAQ
1. What Products does BODA pump mainly produce?
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample.
2. Is BODA direct factory or trader?
BODA own foundry workshop, Machining Workshop, and Assembly workshop.
Welcome to visit our factory anytime.
3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump
4. What information is required for quotes?
If you need the spare parts, we need to know the parts Code and material.
If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better.
Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}